Mobicel Plum Tab Firmware Flash File Download [Stock Rom]

The Mobicel Plum Tab is a compact 7-inch Android tablet released with the MediaTek MT6580 quad-core processor, 1GB RAM, 8GB storage, and Android 6.0 Marshmallow. Like many low-end tablets, it can develop system lag, persistent freezing, app crashes, battery-related shutdowns, Wi-Fi/Bluetooth bugs, and especially bootloops (getting stuck at Mobicel/Android logo, or restarting constantly). These issues frequently result from partition corruption, updates gone wrong, or battery wear. The only stable fix for most deep system faults is a clean reflash with the factory scatter firmware and SP Flash Tool.

This firmware is a proper scatter ROM and must be flashed using SP Flash Tool (MTK platform, Windows only). Flashing wipes all internal data.

Mobicel Plum Tab MT6580 Firmware Details

Reference hardware/specs below for correct firmware usage:

Download Official Firmware for Mobicel Plum Tab (MT6580)

• Build: 26072016_6.0
  • File Name: Mobicel_Plum_Tab_MT6580_26072016_6.0.zip
  • Size: 1012MB
  • 🔗 Download Link: Download (MediaFire)

Why Flash This Specific Firmware?

• Recover from Bootloop and Freezing: Bootlooping, stuck logo, or persistent freezing fixed by full scatter ROM reflash.
• Solve Random Reboots, Power, or App Bugs: Frequent shutdowns, random reboots, and app errors can be fixed by wiping partition corruption and restoring factory defaults.
• Fix Camera, Battery, and Connectivity Issues: Broken camera, Wi-Fi or Bluetooth faults, and battery cut-off often fixed by clean flash unless hardware aged.
• Unbrick or Restore Slow/Non-Responding Tablets: If detected by SP Flash Tool, even most “unresponsive” or “dead” Mobicel Plum Tabs can be revived unless the mainboard is faulty.

Crucial Prerequisites Before Flashing

Back up everything—firmware flashing wipes the tablet completely.

• SP Flash Tool (scatter firmware for Mediatek)
• Install MediaTek VCOM/preloader drivers for Windows.

How to Flash the Firmware

1. Download and extract Mobicel_Plum_Tab_MT6580_26072016_6.0.zip.
2. Install required MTK VCOM/preloader drivers on PC.
3. Launch SP Flash Tool, click “Scatter-loading”, pick MT6580_Android_scatter.txt.
4. Default “Download Only” mode is fine for normal restore.
5. Power off tablet (remove battery if possible).
6. Click “Download”, connect via USB, wait for green download OK.

Visual flashing instructions: How to Flash Stock Firmware to Mediatek (MTK) Smartphones

Disclaimer: Flashing is risky—proceed only if you understand the process. Wipes all data; may brick if interrupted or mismatched.