Match the exact model, region, and branch name. Similar model numbers are not the same device.
Firmware files are here on Inar Guide. Tutorials, flash tools and USB drivers are on FlashGuideHub.
The WE X3 (MT6737T) is an Android 7.0 Nougat device, and many owners report getting stuck at Google FRP verification after a factory reset, requiring a proper stock flash to regain access. In addition, official resources clearly note the X3 firmware is for the MT6737T-only variant, so using the correct package is essential to avoid scatter/preloader mismatches during flashing.
WE X3 Firmware Details
| Model | WE X3 |
| Chipset | MediaTek MT6737T |
| Android Version | Android 7.0 Nougat |
| Firmware Version | WE_X3_MT6737T_V009_20171016 |
| Build Date | 2017-10-16 |
| File Size | ≈1.12 GB |
| File Type | ZIP archive (scatter-based MTK package) |
| Flashing Tool | SP Flash Tool |
Download Official Firmware for WE X3
Size: ≈1.12 GB.
Build Date: 2017-10-16.
Chipset: MediaTek MT6737T.
Android Version: Android 7.0 Nougat.
Download Link: MediaFire Link.
Why Flash This Specific Firmware?
- Removes FRP verification lock on the WE X3 after factory reset by restoring the original Android 7.0 system and userdata with a full stock flash.
- Ensures the correct SoC match—this X3 firmware is explicitly marked “ONLY MT6737T,” preventing scatter/preloader mismatches that occur with the wrong variant.
- Returns the phone to a clean factory state using the official stock package for WE X3, which is the standard remedy when system files are corrupted.
Crucial Prerequisites Before Flashing
- Back up personal data where possible, as a clean flash will erase user content.
- Charge the device to at least 60% to avoid interruptions during flashing.
- Extract “
WE_X3_MT6737T_V009_20171016.zip” on a Windows PC to access the scatter file and images. - Install MediaTek (MTK) USB drivers on the PC for preloader detection.
- Use a reliable USB cable and confirm the device is the MT6737T WE X3 variant.
How to Flash the Firmware
Flashing the firmware onto your WE X3 requires the SP Flash Tool. Follow these steps:
- Download and extract “
WE_X3_MT6737T_V009_20171016.zip” to a folder on your computer. - Install MTK USB VCOM drivers, then launch SP Flash Tool on the PC.
- In SP Flash Tool, load the MT6737T scatter file from the extracted WE_X3_MT6737T_V009_20171016 firmware folder.
- Power off the phone, click “Download” in SP Flash Tool, then connect the WE X3 via USB to start flashing.
- Wait for the success prompt, disconnect, and boot the device to complete restoration to stock Android 7.0.
For a complete guide with screenshots and more details, please visit our official tutorial: How to flash stock firmware to MediaTek (MTK) smartphones.