The WE A50 is an ultra-budget Android phone popular in Bangladesh, but users face slow performance from 512MB RAM, limited 8GB storage leading to frequent “storage full” issues, and basic cameras that struggle in low light. Software failures like bootloops, stuck-on-logo after updates, and FRP lock are common on low-resource devices and are typically resolved by reinstalling the official firmware.
This SPD/Unisoc stock ROM targets the SC7731E platform and can restore stability, clear persistent errors, and return the device to factory condition when flashed correctly.
WE A50 Details
| Device Name | WE A50 |
|---|---|
| Model | A50 |
| Chipset | Spreadtrum/Unisoc SC7731E |
| Android Version | Android 8.1 (Go/Lightweight build) |
| Firmware Filename | WE_A50_HW1_SW9_114428_SPD.zip |
| Firmware Version | HW1_SW9_114428 |
| Build Date | — |
| File Size | ~689MB |
| File Type | ZIP (SPD firmware package) |
| Flashing Tool | SPD Flash Tool (ResearchDownload/UpgradeDownload) |
| Display | 5.0-inch FWVGA 480×854 |
| Rear / Front Camera | 5 MP rear, 2 MP front (basic quality) |
| RAM / Storage | 512MB RAM / 8GB storage, microSD supported |
| Battery | ~2000 mAh class (entry-level capacity) |
| Network | 3G bands; Dual SIM capability on local variants |
| Drivers | SPD/Unisoc USB drivers (for flashing) |
Flashing the wrong firmware or interrupting the process can erase data, corrupt NVRAM/IMEI, or permanently brick the device—always verify “WE A50” and SC7731E before proceeding and back up user data first.
Download Official Firmware for WE A50
Use this package only for WE A50 on the SC7731E platform; do not cross-flash to other WE models or chipsets.
📄 Filename: WE_A50_HW1_SW9_114428_SPD.zip
📦 Size: ~689MB
🔢 Firmware/Variant: HW1_SW9_114428 (A50, SPD platform)
🤖 Android Version: 8.1 family (per A50 official listings)
⬇️ Download Link: MediaFire
How to Flash the Firmware
- Extract WE_A50_HW1_SW9_114428_SPD.zip on your Windows PC and keep the folder path simple (no spaces or Unicode).
- Install SPD/Unisoc USB drivers so the phone is detected properly in flashing mode.
- Open ResearchDownload or UpgradeDownload, then load the .pac file from the extracted firmware folder.
- Power off the WE A50, connect via USB, and start the download/flash in the tool without disconnecting the cable.
- Wait for a success message, then disconnect and boot the phone; the first boot may take several minutes.
For a full step-by-step guide with visuals on SPD flashing, follow the dedicated SPD tool tutorial and driver setup flow.
