Match the exact model, region, and branch name. Similar model numbers are not the same device.
Firmware files are here on Inar Guide. Tutorials, flash tools and USB drivers are on FlashGuideHub.
Launched in April 2022, the Xiaomi Redmi Note 11S 5G is known for its IP53 dust protection and water resistance. For issues like no-boot, system crashes, or failed updates, this guide explains how to use SP Flash Tool to reload stock firmware safely.
Xiaomi Redmi Note 11S 5G Quick Specifications
- Release Year:
- 2022
- Display:
- 6.6-inch IPS LCD, 1080 x 2400 pixels (~399 ppi density), 90Hz refresh rate
- Processor:
- MediaTek Dimensity 810 (MT6833), Octa-core
- RAM:
- 4GB or 6GB
- Storage:
- 64GB or 128GB internal, expandable via microSDXC
- Operating System:
- Launched with Android 11, MIUI 13
- Rear Camera:
- Triple camera system with 50 MP wide, 8 MP ultrawide, and 2 MP macro sensors
- Front Camera:
- 13 MP
- Battery:
- 5000 mAh non-removable, with 33W fast charging
- Connectivity:
- 5G, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.1, NFC, USB Type-C 2.0
- Other Features:
- Side-mounted fingerprint sensor, stereo speakers, 3.5mm headphone jack, IR blaster
These specifications make the Xiaomi Redmi Note 11S 5G a solid choice for Low budget users, but firmware corruption or failed updates can still cause issues.
Download Stock ROM & Required Tools
Download the scatter-based firmware package and required utilities below.
| File Name / Tool | Download Link |
|---|---|
| Xiaomi_Redmi_Note_11S_MT6781_V13.0.1.0.RKEEUXM_20220108.0000.00_EEA_11.zip.zip | Official Scatter Firmware |
| SP_Flash_Tool (latest) | SP Flash Tool |
| MTK VCOM Drivers | MediaTek VCOM Drivers |
| MTK Auth Bypass | MTK META Utility |
Important Safety Notice
- Backup Your Data: Flashing will wipe user data. Create a backup first.
- Use Correct Files: Only use firmware for the exact model/region.
- Battery Level: Charge to at least 50%.
- Windows PC Required: SP Flash Tool is a Windows application.
How to Flash Firmware via SP Flash Tool
Step 1 – Prepare Your Computer
- Install MTK VCOM Drivers (you may need to disable Driver Signature Enforcement on Windows).
- Extract SP Flash Tool, MTK Auth Bypass (if required), and the firmware package.
- Inside the firmware folder, locate the scatter file (e.g.,
Xiaomi_Redmi_Note_11S_MT6781_V13.0.1.0.RKEEUXM_20220108.0000.00_EEA_11.zip).
Step 2 – Load the Scatter in SP Flash Tool
- Run
flash_tool.exeas Administrator. - Click “Scatter-loading File” and select the scatter file.
- Set the mode to Download Only and ensure Preloader is checked.
Step 3 – Bypass Authentication (If Required) & Start Flashing
- If your device requires it, open the MTK Auth Bypass tool and click “Disable Auth”.
- In SP Flash Tool, click the green “Download” button.
- Power off your phone, hold Volume Up + Volume Down, and connect it to the PC.
- Wait for the progress bars to complete and for “Download OK”.
Step 4 – First Boot
Unplug the device and power it on. The first boot can take 5–10 minutes as Android initializes.
Troubleshooting
- Device not detected: Reinstall drivers, try a different USB port/cable, verify correct key combo.
- “Start” disabled or greyed: Reload the correct firmware folder.