The WE E2 is an entry‑level Android smartphone built on MediaTek’s MT6580 quad‑core platform with 1 GB RAM and 8 GB storage, making it suitable for basic tasks but prone to slowdowns under heavier use or when storage fills up. The Android 7.0 Nougat build for this device can encounter issues such as sluggish performance, storage‑full errors, and occasional app crashes that a clean stock firmware reinstall reliably resolves. The two stock ROM packages below (same 2017‑09‑28 build, different mirrors) let you restore the phone to factory state, unbrick from boot loops, and recover smooth day‑to‑day operation.
WE E2 Firmware Details
| Device Name | WE E2 |
| Model | E2 |
| Chipset | MediaTek MT6580 (Quad‑core 1.3 GHz Cortex‑A7) |
| GPU | Mali‑400 MP |
| RAM | 1 GB |
| Storage | 8 GB, microSD supported |
| Display | 5.0‑inch panel (entry‑level class) |
| Rear Camera | 5 MP (basic shooter) |
| Front Camera | 5 MP (basic selfie camera) |
| Battery | Approx. 3100 mAh class noted for this series tier |
| Android Version | Android 7.0 Nougat |
| Firmware Build Date | 2017‑09‑28 (per archive name) |
| File Sizes | 701 MB and 691 MB (two mirrors) |
| File Type | ZIP archive with scatter contents |
| Flashing Tool | SP Flash Tool (MediaTek) |
Warning: Flashing the wrong ROM, using a bad USB cable/port, or interrupting power can brick the device or cause IMEI/network loss, so verify “WE E2 (MT6580)” on the label/about‑phone, back up all data, and keep the battery above 50% before starting.
Download Official Firmware for WE E2
Both packages are the same Android 7.0 MT6580 factory build dated 2017‑09‑28, provided as alternative mirrors for convenience when one host is slow or unavailable .
📄 Filename: WE_E2_MT6580_09282017_7.0.zip
📦 Size: 701 MB
🗓️ Build Date: 2017‑09‑28
🤖 Android Version: 7.0 Nougat
⬇️ Download Link: MediaFire mirror
📄 Filename: We_E2_MT6580_20170928.zip
📦 Size: 691 MB
🗓️ Build Date: 2017‑09‑28
🤖 Android Version: 7.0 Nougat
⬇️ Download Link: MediaFire mirror
How to Flash the Firmware
- Back up contacts, messages, WhatsApp, photos and files because flashing will wipe user data and apps on the WE E2.
- Charge the phone to at least 50%, use a reliable USB cable/port, and install the correct MediaTek VCOM drivers on your PC for SP Flash Tool.
- Extract the ZIP, open SP Flash Tool, load the included scatter file, and select “Download Only” for a clean system restore unless you specifically need to format all partitions.
- Power off the phone, click “Download” in SP Flash Tool, then connect the device via USB and wait for the flashing process to complete without disconnecting or powering on.
- After the green success tick, disconnect, boot the phone, and allow the first start to finish (can take several minutes) before signing into your accounts and restoring backups.
For a step‑by‑step MediaTek walkthrough with screenshots, follow the SP Flash Tool guide here and apply the same steps to the WE E2 scatter package.
