Ulefone Armor X5 Firmware Flash File Download [Stock Rom]

Looking to install the stock ROM on your Ulefone Armor X5? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.

Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.

This file is strictly for the Ulefone Armor X5.

Downloads:

The requirements:

• Windows PC
• A USB cord.
• MediaTek drivers (VCOM driver | MediaTek driver).
• Smartphone Flash Tools (SP Flash Tools).

Flash Ulefone Armor X5 Firmware with SP Flash Tool

1. First, power off/down your smartphone.
2. Locate the Smartphone Flash Tools (SP Flash Tools) you downloaded and extract all the files at once.
3. In the folder you just extracted, find a file named flash_tool.exe, which is the SP Flash Tool, and open/launch it.
4. On Smartphone Flash Tools (SP Flash Tools), make sure you are on the Download tab to proceed.
5. Click on scatter-loading to locate the scatter file that is inside the firmware file you extracted earlier, which will look something like MT6572_Android_scatter.txt.
6. Choose the scatter file, which will load the whole firmware file to the Smartphone Flash Tools (SP Flash Tools).
7. Be sure to untick the preloader .bin because not doing so could damage your smartphone.
8. You can change the Download Only to another option if you wish to.
9. Click Download, and then connect your smartphone while it is still off, and do not attempt to power it on.
10. The flashing will begin immediately; drop your phone to avoid interrupting the flashing and bricking your phone.
11. Wait for the flashing to finish, and a Download OK will appear.
12. You can unplug your phone and boot it up. The first boot takes time, so do not panic.

Now that your smartphone is back, you can now enjoy your smartphone.