Samsung Galaxy Tab A SM-P355 Firmware Flash File Download [Stock Rom]

Download free stock firmware files, compare available builds, and use the matching flash guide before writing anything to the phone.

Before you flash

Match the exact model, region, and branch name. Similar model numbers are not the same device.

Need flashing steps?

Firmware files are here on Inar Guide. Tutorials, flash tools and USB drivers are on FlashGuideHub.

Looking to install the stock ROM on your Samsung Galaxy Tab A SM-P355? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.

Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.

Samsung Galaxy Tab A SM-P355 Quick Specifications

  • Display: 8.0-inch TFT, 1024 x 768 pixels (~160 ppi density)
  • Processor: Qualcomm Snapdragon 410, Quad-core 1.2 GHz
  • RAM: 2GB
  • Storage: 16GB internal, expandable via microSDXC up to 128GB
  • Operating System: Launched with Android 5.0 Lollipop, upgradable to Android 7.1.1 Nougat
  • Rear Camera: 5 MP with autofocus
  • Front Camera: 2 MP
  • Battery: Non-removable Li-Ion 4200 mAh
  • Connectivity: 4G LTE, Wi-Fi 802.11 a/b/g/n, Bluetooth 4.1, GPS, microUSB 2.0
  • Other Features: S Pen support, Accelerometer, Hall sensor, RGB light sensor, 3.5mm audio jack, Single Micro-SIM slot (for cellular model)

This tablet offers a balanced midrange experience with a stylus (S Pen) for productivity, solid LTE connectivity, and a display with a 4:3 aspect ratio, which is well-suited for reading and web Browse. It is a compact and lightweight device, making it highly portable.

Downloads:

Samsung Galaxy Tab A SM-P355 Firmware Download Links (Full Files)
CSCVersionAndroid VersionDownload Links
XXVP355XXU1AOJ15.0.2Download Vietnam (Google Drive)
CAMP355XXU1CRE17.1.1Download Cambodia (Google Drive)
CAMP355XXS1CTJ17.1.1Download Cambodia (SamFW)
THLP355XXS1CTJ17.1.1Download Thailand (SamFW)
XIDP355XXS1CTJ17.1.1Download Indonesia (SamFW)
XMEP355XXS1CTJ17.1.1Download Malaysia (SamFW)
XSPP355XXS1CTJ17.1.1Download Singapore (SamFW)
XTCP355XXS1BRL17.1.1Download Philippines (SamFW)
XXVP355XXS1CTJ17.1.1Download Vietnam (SamFW)

How to Flash Samsung Galaxy Tab A SM-P355 with Odin

  1. Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
  2. Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy Tab A SM-P355 to your PC.
  3. Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
  4. Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
  5. Load the Galaxy Tab A SM-P355 Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
  6. Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
  7. Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.

Read the Complete Odin Flashing Guide

Leave a Reply

Your email address will not be published. Required fields are marked *