Match the exact model, region, and branch name. Similar model numbers are not the same device.
Firmware files are here on Inar Guide. Tutorials, flash tools and USB drivers are on FlashGuideHub.
Looking to install the stock ROM on your Samsung Galaxy Note 3 SM-N900P? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy Note 3 SM-N900P Quick Specifications
- Display: 5.7-inch Full HD Super AMOLED, 1920 x 1080 pixels (~386 ppi density)
- Processor: Qualcomm Snapdragon 800, Quad-core
- RAM: 3GB
- Storage: 32GB or 64GB internal, expandable via microSDXC up to 64GB
- Operating System: Launched with Android 4.3 Jelly Bean, upgradable to Android 5.0 Lollipop
- Rear Camera: 13 MP with autofocus and LED flash
- Front Camera: 2 MP
- Battery: Removable Li-Ion 3200 mAh
- Connectivity: 4G LTE, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.0, NFC, microUSB 3.0
- Other Features: S Pen stylus, Infrared port, various sensors including temperature and humidity
The Samsung Galaxy Note 3 SM-N900P is a specific variant for the Sprint network in the U.S. It features the Qualcomm Snapdragon 800 processor and was a flagship device known for its large, high-resolution screen, powerful performance, and the versatile S Pen.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| XAS | N900PVPSEPL1 | 5.0 | Download United States (Unlocked) (SamFW) |
| SPR | N900PVPSEPL1 | 5.0 | Download United States (Google Drive) |
How to Flash Samsung Galaxy Note 3 SM-N900P with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy Note 3 SM-N900P to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy Note 3 SM-N900P Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.