Looking to install the stock ROM on your Samsung Galaxy J7 SM-J737U? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy J7 SM-J737U Quick Specifications
- Display: 5.5-inch HD TFT, 1280 x 720 pixels (~267 ppi density)
- Processor: Samsung Exynos 7870 Octa, Octa-core 1.6 GHz
- RAM: 2GB
- Storage: 16GB or 32GB internal, expandable via microSDXC up to 400GB
- Operating System: Launched with Android 8.0 Oreo, upgradable to Android 9.0 Pie
- Rear Camera: 13 MP with autofocus and LED flash
- Front Camera: 13 MP
- Battery: 3300 mAh non-removable
- Connectivity: 4G LTE, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2, NFC, microUSB 2.0
- Other Features: 3.5mm headphone jack, multiple sensors including accelerometer, gyro, proximity, and compass
The Samsung Galaxy J7 SM-J737U is the unlocked U.S. variant of the Galaxy J7 (2018). It features a powerful processor, a large display, and a high-resolution front and rear camera setup.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| XAR | J737UUEU5BTB1 | 9.0 | Download United States (Unlocked) (Google Drive) |
| XAA | J737UUESBBUL2 | 9.0 | Download United States (Unlocked) (SamFW) |
| PCT | J737UUESABUI1 | 9.0 | Download Puerto Rico (SamFW) |
How to Flash Samsung Galaxy J7 SM-J737U with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy J7 SM-J737U to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy J7 SM-J737U Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
