Before you flash
Match the exact model, region, and branch name. Similar model numbers are not the same device.
Need flashing steps?
Firmware files are here on Inar Guide. Tutorials, flash tools and USB drivers are on FlashGuideHub.
Looking to install the stock ROM on your Samsung Galaxy A41 SCV48? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy A41 SCV48 Quick Specs
- Display: 6.1-inch Super AMOLED display
- Resolution: 1080 x 2400 pixels
- Processor: Octa-core (2×2.0 GHz Cortex-A75 & 6×1.7 GHz Cortex-A55) – MediaTek Helio P65
- RAM: 4GB
- Storage: 64GB (expandable via microSDXC up to 512GB)
- Operating System: Android 10 (upgradable to Android 12)
- Main Camera: Triple camera setup with a 48 MP wide lens, 8 MP ultrawide, and a 5 MP depth sensor.
- Front Camera: 25 MP wide lens
- Battery: 3500 mAh (non-removable) with 15W fast charging
- Connectivity: Wi-Fi, Bluetooth 5.0, 4G LTE, NFC
- Special Features: IP68 dust and water resistance, under-display optical fingerprint sensor, USB Type-C port, FeliCa (Japanese models only)
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| KDI | SCV48KDU1ATF4 | 12 | Download KDDI (Japan) (Google Drive) |
| KDI | SCV48KDU1CVI1 | 12 | Download KDDI (Japan) (SamFW) |
How to Flash Samsung Galaxy A41 SCV48 with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy A41 SCV48 to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy A41 SCV48 Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.