Match the exact model, region, and branch name. Similar model numbers are not the same device.
Firmware files are here on Inar Guide. Tutorials, flash tools and USB drivers are on FlashGuideHub.
The Mobicel Fever is a value Android smartphone powered by the MediaTek MT6580 chipset. Users regularly report critical issues such as bootloop (stuck at Mobicel logo), a “dead” device after a failed flash, system-level malware or pop-up ads, battery draining rapidly, and IMEI, network, or camera/LCD not working after OS corruption or a mismatched ROM.
When a reset doesn’t help, a complete reinstallation of the official firmware is the most successful solution. Below is the Mobicel Fever scatter ROM for SP Flash Tool.
Mobicel Fever Firmware Details
| Attribute | Details |
|---|---|
| 📱 Device | Mobicel Fever |
| 🆔 Chipset | MediaTek MT6580 |
| 🤖 Android OS | 6.0 |
| ✅ Build Version | V04_09042017 |
| 📂 File Type | MT6580 Scatter Firmware |
| 💻 Flashing Tool | SP Flash Tool |
Download Official Firmware for Mobicel Fever
- Build: V04_09042017
- File Name: Mobicel_Fever_MT6580_V04_09042017_6.0.zip
- Size: 1.02GB
- 🔗 Download Link: Download (MediaFire)
Why Flash This Specific Firmware?
- Fix Bootloop/Stuck after Battery Drain or Error: For Mobicel Fevers that endlessly reboot at the logo, this official ROM/maximal OS replace solves deep boot problems.
- Unbrick a Dead/Non-detected Device: If your Fever doesn’t turn on or isn’t detected by a PC, this ROM and SP Flash Tool are standard unbrick/restore repairs.
- Remove Persistent Malware, Pop-ups, Battery Drain: Factory ROM wipes malware/Monkey Virus, pop-up ads, and fixes fast battery drain or slowdowns after system infection.
- Restore IMEI, Network, Camera, or Wi-Fi: Lost signal/IMEI, non-working camera or Wi-Fi, or other partition problems after bad flash or wrong ROM are reliably fixed by this scatter flash.
Crucial Prerequisites Before Flashing
- The latest SP Flash Tool
- Install correct MediaTek VCOM USB drivers for Windows
Important: Flashing wipes storage—backup your data if possible.
How to Flash the Firmware
- Extract
Mobicel_Fever_MT6580_V04_09042017_6.0.zipon your PC. - Install MediaTek VCOM drivers (enable unsigned drivers if required).
- Run SP Flash Tool, select
MT6580_Android_scatter.txtinside extracted folder. - Set “Download Only” and click Download.
- Power off device and connect to PC (remove battery if needed)—flashing begins.
Need a full illustrated guide?
→ How to Flash MediaTek Devices Using SP Flash Tool
Disclaimer: Flashed wrongly, this process can brick your device. Use only if sure this is your hardware/variant. Not liable for loss or damage.