Match the exact model, region, and branch name. Similar model numbers are not the same device.
Firmware files are here on Inar Guide. Tutorials, flash tools and USB drivers are on FlashGuideHub.
The Digma Linx X1 Pro 3G (LS4051MG) is a budget smartphone from late 2018 that offered a significant upgrade in specifications for its price point, featuring a 5-inch HD IPS screen, 2GB of RAM, and Android 8.1 Go Edition. Despite these improvements, the MediaTek MT6580 processor can still be a bottleneck, leading to software issues over time. For owners looking to restore the phone to its original factory performance, fix persistent bugs, or unbrick a faulty device, flashing the official stock firmware is the most reliable solution.
This guide provides the official firmware package and a clear, safe path to reinstalling the software on your device.
Digma Linx X1 Pro 3G (LS4051MG) Firmware Details
Below are the key specifications for this official firmware package:
| Attribute | Details |
|---|---|
| 📱 Device | Digma Linx X1 Pro 3G (LS4051MG) |
| 🆔 Chipset | MediaTek MT6580 |
| 🤖 Android OS | 8.1 Oreo (Go Edition) |
| 🔢 Build Number | 20181017 |
| 📂 File Type | Scatter Firmware |
| 💻💻 Flashing Tool | SP Flash Tool |
Why Flash the Stock Firmware?
Based on user reports and device specifications, reinstalling the official firmware can resolve several known issues on the Linx X1 Pro 3G:
- Fix Unreliable GPS: Addresses software bugs that can prevent the GPS from getting a quick or stable satellite lock.
- Resolve Fast Battery Drain: A clean install of the lightweight Android Go OS can fix rogue processes that cause the 2500mAh battery to drain quickly.
⚠️ Important Prerequisites
Before you begin, ensure you have the necessary drivers and tools. You will need to download the SP Flash Tool and install the correct MediaTek VCOM drivers on your computer. A full backup of your device data is also highly recommended as this process will erase everything.
Download Official Firmware for Digma Linx X1 Pro 3G (LS4051MG)
- File Name: Digma_Linx_X1_Pro_3G_LS4051MG_MT6580_20181017.zip
- Size: 850 MB
- 🔗 Download Link (Google Drive): Digma Linx X1 Pro 3G Firmware
How to Flash the Firmware
This device’s firmware uses a scatter file and must be installed using the SP Flash Tool. Here is a summary of the main steps:
- Download and extract the firmware package:
Digma_Linx_X1_Pro_3G_LS4051MG_MT6580_20181017.zip. - Install the correct MediaTek VCOM USB drivers on your PC.
- Launch the SP Flash Tool and load the
MT6580_Android_scatter.txtfile from the extracted folder. - Power off your Digma Linx X1 Pro 3G. This model has a removable battery, so taking it out for 10 seconds is recommended to ensure a full power down.
- Set the flashing mode to “Download Only” and click the “Download” button.
- Connect the device to your computer via USB to initiate the flash.
For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:
→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones
Disclaimer: Flashing firmware carries inherent risks. If instructions are not followed precisely, it could damage your device. We are not responsible for any data loss or damage. Proceed with caution.