Coolpad Roar 5 E2C Firmware Flash File Download [Stock Rom]

Welcome to today’s guide on how to download Coolpad Roar 5 E2C Firmware Flash File and how to install the stock ROM on your phone.

This file can help you reset your phone for bootloop, password reset, hanging, and fix many other problems.

This file is strictly for only Coolpad Roar 5 E2C.

Download:

Firmware name:Coolpad_Roar_5_E2C_180102_7.1.1_QFIL.zip

Coolpad Model: Coolpad Roar 5 E2C

Android version: 7.1

File Size: 971MB

Download File

Requirements to Install ROM with QFIL

1. A PC/Laptop in a good working condition
2. A detectable USB cord
3. Qualcomm Flash Image Loader (QFIL)
4. Qualcomm USB driver (32bit|64bit)

Flashing Coolpad Roar 5 E2C with QFIL

1. After you have downloaded all the files, like the drivers and the Coolpad Roar 5 E2C ROM, the first thing to do is to extract them.
2. Extract Qualcomm USB driver to your desired folder on your PC.
3. Install the drivers; you can reboot your PC after installing the drivers (it’s optional).
4. After installing the drivers, extract the ROM you wish to install.
5. Extract QFIL and launch the QFIL.exe program; you will the screen below
6. install ROM with Qualcomm Flash Image Loader (QFIL)
7. On QFIL, click on Browse to locate the firmware you extracted for installation. QFIL flashes/install .mbn extensions; this means that you have to locate the .mbn file in the folder.
8. Once you have located the ROM file, you will get the screen below
9. Select ROM file on QFIL
10. Click Open for QFIL to launch the Coolpad Roar 5 E2C files and ready them for installation.
11. Now, power down/off your phone and connect it to the PC.
12. Download QFIL
13. Click on Download to begin installation or flashing.
14. Installation usually takes time, like 5–10 minutes, likewise the first boot after flashing your phone.
15. Wait for it to successfully install, and after installation, disconnect your smartphone and boot up the phone.