CloudFone Thrill Access Firmware Flash File Download [Stock Rom]

Download free stock firmware files, compare available builds, and use the matching flash guide before writing anything to the phone.

Before you flash

Match the exact model, region, and branch name. Similar model numbers are not the same device.

Need flashing steps?

Firmware files are here on Inar Guide. Tutorials, flash tools and USB drivers are on FlashGuideHub.

The Cloudfone Thrill Access offers a 5-inch HD IPS display, MediaTek MT6735 1.3GHz quad-core processor, Mali-T720 GPU, 2GB RAM, 16GB storage, 8MP rear/5MP front cameras with flash, LTE support, and Android 6.0 Marshmallow. Users commonly face soft-bricking with bootloops, severe lag in apps/multitasking, network/SIM issues, battery drain, camera failures, and stuck logos after updates.

This official 1.45GB stock firmware dated July 23, 2016 restores factory performance, patches MT6735 bugs, fixes connectivity, and unbricks devices via SP Flash Tool.

Cloudfone Thrill Access Firmware Details

SpecificationDetails
Device NameCloudfone Thrill Access
Model IdentifierMT6735
ChipsetMediaTek MT6735 (28nm)
CPUQuad-core 1.3 GHz Cortex-A53
GPUMali-T720 MP2
Android VersionAndroid 6.0 Marshmallow
Firmware Version23072016_6.0
Build DateJuly 23, 2016
File Size1.45 GB
File TypeMTK Scatter ZIP
Flashing ToolSP Flash Tool
Bootloader StatusLocked (Bypass flash)
RAM/Storage2GB/16GB (expandable)
RegionPhilippines/Global
⚠️ Warning for Cloudfone Thrill Access: Wrong MT6735 firmware risks hard brick, baseband/IMEI null, or no USB detection. Verify model in Settings>About. Backup NVRAM first. Mismatched scatter causes infinite bootloops or LTE failure. Ensure >60% battery.

Download Official Firmware for Cloudfone Thrill Access

FilenameRegionFile SizeBuild DateBuild VersionAndroidFlashing TypeNotesDownload
CloudFone_Thrill_Access_MT6735_23072016_6.0.zipPH/Global1.45 GB07/23/2016Stock 6.06.0SP FlashFixes bootloop, lag, LTE, camera; Restore IMEI requiredDownload MT6735 Firmware (MediaFire)

Flashing Requirements

  • Windows PC + MTK VCOM/6735 drivers + SP Flash Tool v5.1824+
  • Charged >60% Cloudfone Thrill Access
  • Full backup (contacts, IMEI via MTK Droid Tools)
  • Quality USB cable; test BROM detection
  • Scatter file + DA auth bypass if SLA enabled
  • MTK IMEI restore tool post-flash

How to Flash the Firmware

  1. Install drivers, extract ZIP, load MT6735 scatter in SP Flash Tool.
  2. Choose Download Only; uncheck Preloader if auth fails.
  3. Power off, Vol- connect USB for purple COM port.
  4. Hit Download; wait green circle (8-15 mins).
  5. Disconnect, battery out/in, long Power boot (may take 10 mins).

For detailed visuals: Follow Cloudfone Thrill Access MT6735 SP Flash Tool Guide.


📢 Disclaimer: Site/providers disclaim liability for bricking, data loss, or flash issues. Users flash at own risk—backup mandatory. Problems? Comment for community help!

Frequently Asked Questions (FAQs)

Fixes Cloudfone Thrill Access bootloop?

Yes, official MT6735 ROM resolves soft-bricks and stuck logos from updates.

Will it erase my data?

Yes, full wipe expected. Backup via PC beforehand as recovery may be inaccessible.

Fixes lag on 2GB RAM?

Stock Marshmallow optimizes MT6735 performance, reduces bloat causing stutters.

Leave a Reply

Your email address will not be published. Required fields are marked *