Looking to install the stock ROM on your Cherry Mobile Omega Lite 2? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
This file is strictly for the Cherry Mobile Omega Lite 2.
Download:
Firmware name: Cherry_Mobile_Omega_Lite_2_V09_PH_20072016.zip
Cherry Mobile Model: Cherry Mobile Omega Lite 2
Android version: 8.1
File Size: 710MB
The requirements are
- A Windows PC
- The SPD Upgrade Tool software
- SPD driver for Windows PC
- USB cord
Flash Cherry Mobile Omega Lite 2 Firmware with SPD Flash Tool
Download the SPD Upgrade Tool and the SPD driver to your PC. After downloading the file, locate where it is saved on your PC and install the driver on your PC.
After installing the driver, locate the SPD Upgrade Tool and extract the file too. Right after extracting the file, locate the extracted file folder, and you will find files like this below.
Locate the Open UpgradeDownload.exe and open it to launch the SPD Upgrade Tool.
Once it is open, you will get the interface below, and the next step is to click the “SETTINGS” button to locate the .PAC file you extracted recently from the firmware file.
Click Open to load the .PAC firmware file to the SPD Upgrade Download tool.
Power off your smartphone and connect it to the PC using the USB cord.
Click the Start button (this looks like the “send” button) to begin the flashing.
Drop your smartphone, do not shake the device, and wait for the flashing process to finish.
Once the flashing is done, you will get a previous Passed message, which means you can now disconnect your device.
Enjoy your new device.
