This page provides the official download link for the BQ Mobile 5007L Iron stock firmware. Released in early 2018, the BQ 5007L Iron was a budget smartphone that prioritized battery life above all else, packing an impressive 4000 mAh battery into a compact 5.0-inch frame. It is powered by the MediaTek MT6737M chipset and runs Android 7.0 Nougat. However, with only 1GB of RAM, its performance can be severely limited.
Due to the low RAM and older software, the device is highly susceptible to extreme lag, unresponsiveness, and bootloops. If your 5007L Iron is nearly unusable due to these software issues, reinstalling the official stock ROM is the most effective way to restore its functionality. This flash file will perform a clean installation of the original operating system, removing all accumulated errors. This guide provides the files needed to unbrick your phone and improve its performance.
User Data Advisory for the BQ Mobile 5007L Iron
CRITICAL NOTICE: The firmware flashing procedure will perform a full data wipe, permanently erasing all personal files from your phone’s internal storage. This includes photos, contacts, apps, and documents. It is imperative that you back up all your important data before you start. Proceed with this guide at your own risk.
BQ Mobile 5007L Iron: Quick Device Specifications
- Device Name:
- BQ Mobile BQ-5007L Iron
- Release Date:
- January 2018
- Chipset:
- MediaTek MT6737M (28nm)
- Display:
- 5.0 inches, IPS LCD, 1280 x 720 pixels (HD)
- Battery:
- Li-Po 4000 mAh, non-removable
- RAM/Storage:
- 1GB RAM, 8GB Internal Storage
- Original OS:
- Android 7.0 Nougat
- Special Features:
- Large Battery, Rear-mounted Fingerprint Scanner, 4G LTE
Required Downloads
Before proceeding, download the firmware package and the necessary tools and drivers from the links below. Extract them all into a single, easy-to-find folder on your computer.
- Firmware Package: The official ROM for the BQ Mobile 5007L Iron is available in the table below.
- SP Flash Tool: The official utility for flashing MediaTek chipsets.
- MediaTek VCOM USB Drivers: Essential for your computer to recognize the device.
Download BQ Mobile 5007L Iron Stock Firmware
| Region / Build | Android Version | File Size | Download Link |
|---|---|---|---|
| 20180104 | Android 7.0 Nougat | 1.34GB | Download (MediaFire) |
How to Flash the Firmware: 5 Key Steps
This is a high-level overview of the flashing process using SP Flash Tool. For a full, safe, and detailed guide, you must click through to our main pillar article linked below.
- Prepare Your PC: Download and install the required MediaTek VCOM USB drivers to ensure your computer can communicate with your phone.
- Load the Firmware: Launch SP Flash Tool and load the firmware by selecting the `…scatter.txt` file from the extracted firmware folder (e.g.,
BQ_5007L_MT6737M...zip). - Configure the Tool: Ensure the flashing mode is set to “Download Only.” This is the safest option and helps prevent the loss of your phone’s IMEI number.
- Initiate the Flash: Power off your phone completely. Click the large “Download” button within the SP Flash Tool to set it to standby.
- Connect Your Device: Immediately connect your powered-off phone to the PC with a USB cable to begin the flashing process, which finishes when a green “OK” checkmark appears.
Warning: This summary omits critical steps. For the complete, illustrated guide, please visit our main article: How to Flash Stock Firmware on MediaTek Smartphones.
Troubleshooting Common Issues
1. Extreme Lag and Unresponsiveness
Cause: This is the most common complaint for the BQ 5007L Iron. The combination of a full version of Android 7.0 Nougat (which is not optimized for low-spec hardware) and only 1GB of RAM means the system is constantly struggling for resources.
Solution: A clean firmware flash provides the best possible starting point. After flashing, you must be disciplined: install only essential applications, prioritize “Lite” versions of apps (Facebook Lite, etc.), avoid widgets, and regularly restart the phone to clear the RAM. Go to Developer Options and set all animation scales to “Off”.
2. Abnormal Battery Drain
Cause: While the 4000 mAh battery is large, a software issue or a rogue app running in the background can still cause it to drain quickly. After a flash, the OS may also have miscalibrated battery statistics.
Solution: Perform a battery calibration after flashing. Use the phone until it turns off, then charge it to 100% without interruption. A clean flash will also remove any software that was causing the drain. Be mindful of which apps you reinstall afterwards.
3. “Storage Space Running Out” Warning
Cause: The device has only 8GB of internal storage. The operating system and pre-installed apps can consume 5-6GB of this space, leaving very little for user data.
Solution: A microSD card is mandatory for this phone. Use it to store all photos, videos, and media. Keep the number of installed apps to an absolute minimum and regularly clear the application cache for browsers and social media apps.
Frequently Asked Questions (FAQs)
- What is the difference between the BQ 5007L Iron and the Iron Max?
- The main differences are in performance and size. The “Max” version has a larger 5.5-inch screen (vs 5.0-inch), and more importantly, double the RAM (2GB vs 1GB) and storage (16GB vs 8GB), making the BQ Mobile 5007L Iron the lower-spec model.
- Can I upgrade the BQ 5007L Iron to Android 8.0 Oreo?
- No. The firmware provided, Android 7.0 Nougat, is the only official software version released for the BQ Mobile 5007L Iron. Its hardware is not sufficient for newer Android versions.
- Will this firmware fix my fingerprint scanner if it has stopped responding?
- If the fingerprint scanner has stopped working due to a software glitch or a corrupted driver, flashing the stock ROM will restore the original software and should fix the issue. However, this will not repair a physical hardware failure.
- Is this phone still usable in 2025?
- The BQ Mobile 5007L Iron is a very old device. While a clean firmware flash can make it functional for basic tasks like calls, SMS, and maybe WhatsApp Lite, its 1GB of RAM and 8GB of storage will make using most modern apps a very slow and frustrating experience.
Conclusion
Restoring your BQ Mobile 5007L Iron with its official stock firmware is the best method for tackling severe performance lag and other critical software errors. By using SP Flash Tool and the files provided, and by carefully following the full instructions in our main pillar guide, you can get the device running as smoothly as its hardware will allow. Always remember to back up your data before you begin the process.
If this guide helped you, or if a link is broken, please let us know in the comments below.
