Welcome to today’s guide on how to download Blu C5 Firmware Flash File and how to install the stock ROM on your phone.
This file can help you reset your phone for bootloop, password reset, hanging, and fix many other problems.
This file is strictly for only Blu C5.
Downloads:
The requirements are:
- A Windows PC
- The SPD Upgrade Tool software
- SPD driver for Windows PC
- USB cord
Flash Blu C5 with SPD Flash Tool
Download the SPD Upgrade Tool and the SPD driver to your PC. After downloading the file, locate where it is saved on your PC and install the driver on your PC.
After installing the driver, locate the SPD Upgrade Tool and extract the file too. Right after extracting the file, locate the extracted file folder, and you will find files like this below.
Locate the Open UpgradeDownload.exe and open it to launch the SPD Upgrade Tool.
Once it is open, you will get the interface below, and the next step is to click the “SETTINGS” button to locate the .PAC file you extracted recently from the firmware file.
Click Open to load the .PAC firmware file to the SPD Upgrade Download tool.
Power off your smartphone and connect it to the PC using the USB cord.
Click the Start button (this looks like the “send” button) to begin the flashing.
Drop your smartphone, do not shake the device, and wait for the flashing process to finish.
Once the flashing is done, you will get a previous Passed message, which means you can now disconnect your device.
Enjoy your new device.
