The HOMTOM HT30 Pro (MT6737M) is a MediaTek-based budget phone line that typically uses SP Flash Tool scatter firmware packages for full restores and upgrades.
This stock ROM package is mainly useful when the device gets stuck on the boot logo after an interrupted update, fails to boot after a bad app/system modification, or needs a full re-install to recover from a soft-brick state.
Installing the correct firmware for this model can help return the phone to a clean, bootable state, but results depend on matching the exact platform and firmware branch.
HOMTOM HT30 Pro Firmware Details
| Device Name | HOMTOM HT30 Pro |
|---|---|
| Model Identifier | HT30 Pro |
| Codename | full_joyasz6737m_35_n (firmware branch string) |
| Chipset / Platform | MediaTek MT6737M |
| Launch Android Version(s) | Android 7.0 (Nougat) |
| Current Firmware Line | Y376H1.HT.HT30Pro.16+2.EU.Neutra.7.0.V01.03 (EU / Neutra branch) |
| Typical File Size Range | ~900MB–1.1GB for full scatter packages (varies by build/region) |
| Firmware Type | MediaTek scatter firmware package (SP Flash Tool) |
| Flashing Tool | SP Flash Tool |
| Bootloader Requirement | Typically not required for SP Flash Tool scatter flashing (device is flashed in preloader mode), but correct scatter + partitions must match the MT6737M build. |
| Region / Branch notes | This firmware line is labeled EU / Neutra; cross-flashing to mismatched HT30 Pro variants can cause boot issues. |
⚠️ Flashing Risks & Disclaimer
For the HT30 Pro (MT6737M), the biggest risk is flashing a mismatched scatter/partition set (or wrong MT6737 variant), which can lead to a non-booting system or loss of modem calibration until the correct stock package is restored.
This page indexes publicly shared stock firmware packages for device recovery and does not claim ownership of the ROM contents; all trademarks and software remain the property of their respective owners.
Download Official Firmware for HOMTOM HT30 Pro
This package is an original stock ROM mirrored for preservation, as the manufacturer no longer provides public downloads for this model.
| Region / Variant | Filename | Build / Version | Android / Firmware Version | File Type | Build Date | File Size | Download Link |
|---|---|---|---|---|---|---|---|
| EU / Neutra (MT6737M only) | Homtom_HT30_Pro_MT6737m_20170504_7.0.zip | V01.03 (Y376H1.HT.HT30Pro…EU.Neutra…V01.03) | Android 7.0 (NRD90M) | SP Flash Tool scatter package | 2017-05-04 | 953.38MB | Download EU/Neutra build (MediaFire mirror) |
Flashing Requirements
- Windows PC (preferred for MTK drivers and SP Flash Tool reliability).
- SP Flash Tool compatible with MT6737M scatter packages.
- MediaTek USB/VCOM drivers correctly installed so the phone can be detected while powered off (preloader handshake).
- Backup: “Firmware Upgrade” mode can rewrite more partitions than “Download Only” and may wipe user data; plan for a full data loss scenario.
- Device verification: confirm the platform is MT6737M and that the intended branch is HT30 Pro EU/Neutra before flashing.
How to Flash the Firmware
- Download the correct HT30 Pro package and extract it, then locate the MT6737M scatter file referenced by the ROM instructions (MT6737M_Android_scatter.txt).
- Install MediaTek USB drivers and launch SP Flash Tool, then load the scatter via “Scatter-loading” as described for this MT6737M build.
- Select the safest flash mode for the situation: use “Download Only” for a straightforward re-flash, or “Firmware Upgrade” when specifically upgrading/downgrading and the package requires a full partition refresh.
- Power off the phone and connect it to the PC via USB to allow the preloader connection, then start the flash and wait for the completion indicator (green check).
- On first boot after flashing Android 7.0, allow extra time for initialization; repeated boot cycling usually indicates a variant/branch mismatch and should be addressed by using the exact MT6737M HT30 Pro build.
External guide (SP Flash Tool)
Frequently Asked Questions (FAQs)
Is this firmware only for MT6737M, or will it work on other HT30/HT-series variants?
This package is explicitly labeled “ONLY MT6737m” and is intended for the HT30 Pro line on that chipset; flashing it to a different MT6737 variant or a different HomTom model risks boot failure.
What does “EU / Neutra” mean in the build string, and does it matter?
The listed build string includes an EU/Neutra branch label, and branch mismatches are a common cause of “flashed successfully but won’t boot” behavior on MTK devices.
Why does the phone still bootloop after a successful SP Flash Tool flash?
On this model, a persistent bootloop after a clean flash often points to a wrong variant (scatter/partition mismatch) rather than a flashing failure, so using the exact HT30 Pro MT6737M build is critical.
Should “Download Only” or “Firmware Upgrade” be used for HT30 Pro?
The provided ROM notes mention both options: “Download Only” is typically used for re-installing, while “Firmware Upgrade” is used when upgrading as it can adjust more partitions.
Does flashing this firmware remove Google lock (FRP) on HT30 Pro?
Some sources note that flash files can sometimes be used for bypassing Google verification, but behavior depends on the exact firmware and security state; this is not guaranteed and should not be relied on as a primary purpose.
Is the MediaFire link an official HOMTOM download server?
No—this file is hosted on a third-party mirror (MediaFire) and should be treated as a preserved stock package rather than a manufacturer-hosted download.
What is the most common “hard” mistake when flashing MTK scatter ROMs on this device?
Selecting a mismatched scatter/firmware for the wrong HT30 Pro variant (even within MT6737 family) can leave the phone unbootable until the correct stock package is flashed again.
