The CloudFone Thrill Boost is an entry-level Android smartphone built for budget users, featuring a 5‑inch FWVGA display, 1.3 GHz quad‑core processor (MediaTek MT6580 family), 1 GB RAM, 8 GB internal storage (expandable), dual SIM, and basic 3G connectivity.
Over time, users commonly report issues such as heavy lag when storage is full, random app crashes, stuck‑on‑logo bootloops after failed tweaks or malware, and soft‑bricked devices following incorrect ROM ports or root attempts.
The Cloudfone_Thrill_Boost_MT6580_170726.zip package is an official stock firmware for the Thrill Boost (MT6580) that reinstalls the complete system via SP Flash Tool, fixing bootloops, restoring stability, and unbricking devices that are still detected by a PC.
CloudFone Thrill Boost Firmware Details
| Device Name | Model Identifier | Chipset | Android Version | Firmware Version / Name | Build Date (ROM) | File Size | File Type | Flashing Tool | Bootloader Status | Region / Notes |
|---|---|---|---|---|---|---|---|---|---|---|
| CloudFone Thrill Boost | Thrill Boost MT6580 (dual‑SIM, 3G) | MediaTek MT6580/MT6580M, quad‑core 1.3 GHz Cortex‑A7, Mali‑400 GPU | Android 6.0 Marshmallow (stock) | Cloudfone_Thrill_Boost_MT6580_170726.zip | 2017‑07‑26 firmware build (factory ROM) | ≈777 MB compressed zip (scatter + images) | Scatter-based stock ROM archive (MT6580_Android_scatter + system, boot, recovery, etc.) | SP Flash Tool (MediaTek) | Bootloader typically locked; uses MTK preloader Download Mode | Philippines budget device; only for original CloudFone Thrill Boost, not Boost 2 / Boost 2 Plus / Boost 3 |
Flashing the wrong MT6580 ROM or incorrect SP Flash Tool settings can permanently brick your CloudFone Thrill Boost, wipe all data, and corrupt IMEI/NVRAM. Confirm that your phone is the first‑gen “CloudFone Thrill Boost” with MT6580, not Thrill Boost 2 / 2 Plus / 3, back up important data and NVRAM, keep the battery well charged, and never interrupt SP Flash Tool once flashing starts.
Download Official Firmware for CloudFone Thrill Boost
| Filename | Region | File Size | Build Date | Build Version | Android Version | Flashing Type | Notes / Target | Download Links |
|---|---|---|---|---|---|---|---|---|
| Cloudfone_Thrill_Boost_MT6580_170726.zip | Philippines / CloudFone Thrill Boost MT6580 only | ≈777 MB compressed | 2017‑07‑26 Marshmallow factory build | Official Thrill Boost MT6580 stock ROM (170726) | Android 6.0 Marshmallow | SP Flash Tool “Download Only” or “Firmware Upgrade” (scatter) | Use for unbrick, logo/bootloop fix, recovery from failed custom ROM ports, and full system restore on CloudFone Thrill Boost MT6580 devices. | Download CloudFone Thrill Boost Firmware (MediaFire) |
Flashing Requirements
- CloudFone Thrill Boost handset with confirmed MT6580 chipset and at least 60% battery charge.
- Cloudfone_Thrill_Boost_MT6580_170726.zip extracted on a Windows PC so the MT6580_Android_scatter and image files are visible.
- Latest SP Flash Tool and proper MediaTek VCOM/Preloader USB drivers installed on the computer.
- Good‑quality USB cable and a stable USB port (avoid hubs) to prevent disconnections.
- Backup of user data and, if possible, NVRAM/IMEI before flashing, because some modes (especially Firmware Upgrade) can wipe network calibration and internal storage.
How to Flash the Firmware
- Install MTK VCOM drivers, then extract SP Flash Tool and the Cloudfone_Thrill_Boost_MT6580_170726.zip firmware into separate folders on your PC.
- Launch SP Flash Tool, click “Scatter‑loading,” and select the MT6580_Android_scatter.txt from the Thrill Boost firmware folder to load all partitions.
- Choose “Download Only” for a standard reinstall or “Firmware Upgrade” for deeper repair, carefully decide whether to include preloader, and then press the Download button.
- Power off the phone, connect the CloudFone Thrill Boost to your PC via USB (holding Volume Up or Down can help trigger preloader mode), and wait until SP Flash Tool completes flashing and shows a green success tick.
- Disconnect the device and boot it up; first startup on Android 6.0 may take several minutes while Marshmallow optimizes apps and initializes the system.
If you need screenshots and a generic walkthrough for MediaTek scatter ROMs like this one, follow the complete SP Flash Tool step‑by‑step guide for MTK devices before flashing your Thrill Boost.
Flashing stock or custom firmware is inherently risky. This website and the firmware providers are not responsible for bricked CloudFone Thrill Boost units, corrupted NVRAM/IMEI, lost data, or any other damage resulting from the use of the MT6580 170726 files or procedures described here. By downloading and flashing, you accept full responsibility for your actions and their consequences. If you run into trouble, share your symptoms in the comments so the community can assist while you remain solely accountable for your device.
Frequently Asked Questions (FAQs)
What problems can this CloudFone Thrill Boost firmware fix?
This stock ROM can repair bootloops, stuck logo, repeated “app has stopped” errors, severe lag, and system corruption caused by failed root, custom ROM ports, or malware on the Thrill Boost. It is also effective for soft‑bricked phones still recognized by a PC but unable to enter Android.
Is this firmware only for the original Thrill Boost MT6580?
Yes, Cloudfone_Thrill_Boost_MT6580_170726.zip is designed solely for the first‑generation CloudFone Thrill Boost with MT6580 and Android 6.0; flashing it on Thrill Boost 2, Thrill Boost 2 Plus, Thrill Boost 3, or any other MT6580 device can hard‑brick those phones. Always verify the exact model on the box/label or in Settings > About phone.
Does this firmware upgrade Android or add new features?
No, this ROM keeps the Thrill Boost on Android 6.0 Marshmallow and mainly restores the system to its original, stable state. Major OS upgrades would require different builds or custom ROMs, which often bring extra bugs and compatibility issues on MT6580 hardware.
SP Flash Tool does not detect my Thrill Boost. What should I try?
Reinstall MTK VCOM drivers, change the USB cable and port, ensure the phone is fully powered off, and connect while holding Volume Up or Down to trigger preloader mode. Avoid USB hubs and close other MTK tools so SP Flash Tool can communicate properly with the MT6580 device.
