The ZTE Blade L5 Plus (model T320) is an entry-level smartphone from 2016 designed for basic daily tasks. It features a 5.0-inch HD display and is powered by a MediaTek MT6580 processor. This guide provides the official stock ROM for the Russian variant, which is essential for unbricking the device, fixing software bugs, removing a Google FRP lock, or restoring the phone to its original factory software.
CRITICAL WARNING: The firmware filename incorrectly states “SPD”. This device uses a MediaTek (MTK) chipset and you MUST use the SP Flash Tool. Using the wrong tool (like SPD Upgrade Tool) will fail and could damage your device.
Quick Device Specs
- Device: ZTE Blade L5 Plus (T320)
- Release year: 2016
- Chipset: MediaTek MT6580
- Display: 5.0″ IPS LCD, HD
- Battery: 2150 mAh
- Original OS: Android 5.1 Lollipop
Required Downloads
To flash a MediaTek device, you will need the specific drivers and flashing tool. You can find the downloads for these in our main guide linked below.
- SP Flash Tool
- MediaTek VCOM USB Drivers
Stock ROM (Firmware)
| Region / Carrier | Build | Android | Type | Download | Chipset |
|---|---|---|---|---|---|
| Russia | V1.0.0B16 | 5.1 | SP Flash Tool Firmware | Download | MediaTek |
How to Flash the Stock Firmware
Flashing the stock ROM onto your ZTE Blade L5 Plus requires a Windows PC and the SP Flash Tool. The process involves installing the MediaTek VCOM drivers, loading the MT6580_Android_scatter.txt file from the firmware into the tool, and then connecting your powered-off phone to start the flash. This will completely restore your device to its original factory software.
For detailed, step-by-step instructions with screenshots and tool download links, please follow our comprehensive pillar guide: How to Flash Firmware with SP Flash Tool.
Device-Specific Troubleshooting for ZTE Blade L5 Plus
- Correct Driver Installation: The most common failure point is incorrect drivers. If the tool doesn’t see your phone, you must install the MediaTek VCOM drivers, not SPD drivers. This often requires you to disable ‘Driver Signature Enforcement’ in Windows first.
- Using the “Boot Key”: To initiate the flash, power the phone off completely. Press and hold the Volume Down button, and while holding it, connect the phone to your PC. The tool should then detect it and begin the process. If Volume Down doesn’t work, try holding Volume Up.
- Fixing Google FRP Lock: If you’re locked out of your phone by Google’s Factory Reset Protection (FRP), flashing this stock ROM will perform a complete wipe and remove the locked account.
- Safer Flashing (Uncheck Preloader): For a safer flashing process that is less likely to cause a hard brick, it is highly recommended to uncheck the `preloader` partition in SP Flash Tool before clicking Download. Flashing an incorrect preloader is the most common cause of a permanently dead phone.
FAQs
Q1. Why does the filename say “SPD” if the phone is MediaTek?
This is a common packing or labeling error. The device’s official specifications confirm it uses a MediaTek MT6580 chipset, so you must use the MediaTek tools (SP Flash Tool) and drivers, regardless of the filename.
Q2. What is a “scatter file”?
The scatter file (e.g., MT6580_Android_scatter.txt) is a crucial map for MediaTek firmware. It tells SP Flash Tool the name, size, and location of every partition on the device’s storage, ensuring each part of the software is flashed to the correct place.
Q3. My phone is stuck on the ZTE logo. Will this fix it?
Yes. Being stuck on the logo (a “bootloop”) is a classic software problem. Flashing the stock ROM is the most reliable way to fix this issue as it completely reinstalls the phone’s operating system.
Q4. Will this process erase my data?
Yes. Flashing the stock ROM with SP Flash Tool will perform a full factory reset and completely wipe all personal data, apps, and settings from your device.
