The Zen Admire Strong is an affordable MT6737-powered Android smartphone widely used across India, offering dual-SIM VoLTE, 5-inch display, and good battery life for its class. Users report common issues: bootloops after failed updates, sudden touch or network failures, and IMEI loss after factory resets or malware. Most persistent software failures and dead-boot symptoms are resolved by restoring the full scatter-based stock firmware with SP Flash Tool—preferred by Indian service centers for its reliability.
This article provides the original V7 27022018 scatter ROM. Always match the build to your hardware version and use SP Flash Tool plus authentic MediaTek drivers for a safe, complete flash.
Zen Admire Strong Firmware Details
Confirm model and file details before flashing. SP Flash Tool is required for all MTK/MediaTek-based scatter firmware.
| Attribute | Details |
|---|---|
| 📱 Device | Zen Admire Strong |
| 🆔 Chipset | MediaTek MT6737 |
| 🤖 Android OS | 7.0 Nougat |
| ✅ Build Version | V7_27022018 |
| 📂 File Type | Scatter (MTK Firmware) |
| 💻 Flashing Tool | SP Flash Tool (MediaTek) |
Download Official Firmware for Zen Admire Strong
- Build: V7_27022018
- File Name: Zen_Admire_Strong_MT6737_V7_27022018.zip
- Size: 1.15GB
- 🔗 Download Link: Download (MediaFire)
Some of the Bug Firmware Fixes
Flashing the correct scatter firmware addresses:
- Bootloop/stuck at logo or power-on failure after system errors or malware.
- Touchscreen and sensor malfunctions caused by bad or mismatched ROMs.
- IMEI and network/SIM loss—restores full modem and radio operation.
- App crashes, battery drain, and Wi-Fi/Bluetooth bugs from corrupted partitions.
- “Dead” device recognition for complete recovery via SP Flash Tool.
Why Flash This Specific Firmware?
Indian service techs and users recommend:
- Only authentic scatter builds restore touch, camera, and network after deep failure—generic ROMs risk permanent hardware issues.
- Flashing is favored over sideload or OTA for full recovery after root or factory reset damage.
- Consistent solution for lost IMEI and SIM issues after failed updates or non-official repairs.
- SP Flash Tool ensures a stable, clean reinstall across all partitions and is widely supported in Indian mobile services.
Crucial Prerequisites Before Flashing
Back up all data; flashing will erase internal storage.
- Latest SP Flash Tool (Windows).
- Install MediaTek VCOM/Preloader drivers for proper USB detection.
How to Flash the Firmware
SP Flash Tool is required for all MediaTek ROMs:
- Extract ZIP to a folder and install drivers.
- Run SP Flash Tool, load the scatter file, and connect the powered-off phone by USB (hold boot key if needed).
- Click Download. Wait for green check and reboot.
See step-by-step visuals and troubleshooting here:
→ How to Flash Stock Firmware to MediaTek (SP Flash Tool)
Disclaimer: Only use matched firmware for your device batch. Wrong files can break IMEI or touch permanently.
