Xolo Era 2X Firmware Flash File Download [Stock Rom]

The Xolo Era 2X is a budget 4G VoLTE smartphone equipped with a MediaTek MT6737M chipset and a rear-mounted fingerprint scanner, a key feature for its price segment. However, a widespread issue reported by users across various Indian tech forums and product review sites was the fingerprint sensor becoming slow and unresponsive over time. This frustrating glitch, which often required a device reboot to temporarily fix, points to a software driver or calibration issue rather than a hardware fault. Flashing the official stock firmware is the most reliable solution to this problem, as it reinstalls the original, stable hardware drivers and system libraries.

Xolo Era 2X (2GB) Firmware Details

Download Official Firmware for Xolo Era 2X (2GB)

Why Flash This Specific Firmware?

• Fix Unresponsive Fingerprint Sensor: This is the primary reason for many users. The firmware reinstalls the correct drivers and firmware for the fingerprint module, fixing recognition failures and slow response times that are not solved by a factory reset.
• Resolve Bootloop or “Hang on Logo”: If your Xolo Era 2X is stuck on the Xolo logo and fails to boot, flashing this stock ROM is the standard procedure to unbrick the device by reinstalling the entire operating system.
• Address Overheating and Battery Drain: A clean firmware installation can resolve software-related issues that cause the device to overheat or the battery to drain quickly, by restoring the original power management profiles.
• Restore IMEI and Network Connectivity: For devices with a null or invalid IMEI after failed rooting attempts, this firmware can restore the baseband and NVRAM partitions, fixing all network and VoLTE calling issues.

Some of the Bug / Firmware Fixes

• Firmware V2.0B29: This build includes updated drivers and stability improvements for the fingerprint sensor, specifically targeting the unresponsiveness and recognition errors reported by users.
• Restores the original thermal management configuration in the kernel, helping to reduce the overheating issues that occur during heavy usage.
• Fixes software corruption in the system partition that commonly leads to the device getting stuck in a bootloop.
• Reinstalls the stock camera application and its libraries, which can solve “cannot connect to camera” errors and improve image processing.

Crucial Prerequisites Before Flashing

• Backup All Data: Flashing will completely erase all personal data from your phone’s internal storage.
• Charge Your Phone: Ensure your battery is charged to at least 60% to avoid shutdowns during the process.
• Install MediaTek Drivers: You must install MTK VCOM USB drivers on your Windows PC.
• Download the Flashing Tool: You will need the SP Flash Tool.
• Use a Quality USB Cable: For a stable connection, use a reliable micro USB cable.

How to Flash the Firmware

Flashing the scatter file firmware onto your Xolo Era 2X requires the SP Flash Tool. Follow these steps:

1. Download and extract the firmware Xolo_Era_2X_..._0302.zip file on your computer.
2. Launch the SP Flash Tool application.
3. Click on the “Scatter-loading File” button and navigate to the extracted firmware folder to select the MT6737M_Android_scatter.txt file.
4. Ensure the flashing mode is set to “Download Only”. Avoid using “Format All + Download” as it can erase your IMEI.
5. Click the green “Download” button at the top of the tool.
6. Power off your Xolo Era 2X completely.
7. Connect the phone to your computer via USB cable. The tool should detect it automatically and begin the flashing process. (If it is not detected, try connecting while holding the Volume Down button).
8. Wait for the process to complete, which will be confirmed with a large green checkmark pop-up.
9. Disconnect the phone and power it on. The first boot can take 5 to 10 minutes.

For a complete guide with screenshots and more details, please visit our official tutorial: How to Flash Stock Firmware on MediaTek Smartphones.