Xolo Era 2V Firmware Flash File Download [Stock Rom]

The Xolo Era 2V is a selfie-focused smartphone powered by the MediaTek MT6737M chipset. Its standout feature was the 8MP front-facing camera paired with a dedicated “Moonlight” flash for better low-light selfies. However, a common user complaint across Indian tech forums was that software glitches could cause the front camera or its special flash to stop working correctly. Users reported the camera app crashing or the flash failing to activate, issues not always fixed by a factory reset. Flashing the official stock firmware is the definitive solution, as it reinstalls the original camera drivers and specific system libraries required for the Moonlight flash to function properly.

Xolo Era 2V Firmware Details

Download Official Firmware for Xolo Era 2V

Why Flash This Specific Firmware?

• Restore Front “Moonlight” Flash: This is the most specific and crucial reason. If your front flash has stopped working due to a software error, flashing this stock ROM will reinstall the proprietary drivers and libraries needed to control it.
• Fix “Camera Failed” Errors: Reinstalls the complete camera HAL and application stack, fixing common “cannot connect to camera” errors or app crashes for both the front and rear cameras.
• Solve Bootloop or “Hang on Logo”: If your Xolo Era 2V is stuck on the boot screen and will not start, flashing this firmware is the standard method used to unbrick the device by reinstalling the entire OS.
• Address Abnormal Battery Drain: A clean flash restores the original, optimized power management profiles and kernel, fixing software bugs that can cause the battery to drain quickly even when the phone is idle.

Some of the Bug / Firmware Fixes

• Firmware V1.0 (Sept 28, 2017): This build contains the stable, factory-calibrated camera drivers specifically for the front sensor and its unique Moonlight flash, resolving software-induced hardware failures.
• Restores the optimized kernel and power profiles for Android 7.0, which helps to mitigate the battery drain issues reported by users after extended use.
• Fixes software corruption in the system partition that can lead to the device becoming stuck in a bootloop after a failed update or factory reset.
• Reinstalls the original modem files, which can improve 4G VoLTE network stability and fix intermittent signal drops.

Crucial Prerequisites Before Flashing

• Backup All Data: Flashing will completely erase all personal data from your phone’s internal storage.
• Charge Your Phone: Ensure your battery is charged to at least 60% to avoid shutdowns during the process.
• Install MediaTek Drivers: You must install MTK VCOM USB drivers on your Windows PC.
• Download the Flashing Tool: You will need the SP Flash Tool.
• Use a Quality USB Cable: For a stable connection, use a reliable micro USB cable.

How to Flash the Firmware

Flashing the scatter file firmware onto your Xolo Era 2V requires the SP Flash Tool. Follow these steps:

1. Download and extract the firmware Xolo_Era_2V_..._20170928.zip file on your computer.
2. Launch the SP Flash Tool application.
3. Click on the “Scatter-loading File” button and navigate to the extracted firmware folder to select the MT6737M_Android_scatter.txt file.
4. Ensure the flashing mode is set to “Download Only”. Avoid using “Format All + Download” as it can erase your IMEI.
5. Click the green “Download” button at the top of the tool.
6. Power off your Xolo Era 2V completely.
7. Connect the phone to your computer via USB cable. The tool should detect it automatically and begin the flashing process. (If it is not detected, try connecting while holding the Volume Down button).
8. Wait for the process to complete, which will be confirmed with a large green checkmark pop-up.
9. Disconnect the phone and power it on. The first boot can take 5 to 10 minutes.

For a complete guide with screenshots and more details, please visit our official tutorial: How to Flash Stock Firmware on MediaTek Smartphones.