The Xiaomi Pad 6S Pro 12.4, codename sheng, is a high‑end 12.4‑inch tablet with a Snapdragon 8 Gen 2 chipset, 3K 144 Hz LCD, up to 16 GB RAM and a 10,000 mAh battery with 120 W fast charging, built for gaming, multitasking and content creation.
The latest HyperOS 3.0.3.0.WNXCNXM / WNXMIXM Android 16 ROMs for China and Global, plus Android 15 HyperOS 2.0.212.0/210.0 builds for EEA, RU and ID, bring updated security patches, improved memory and CPU scheduling, lighter window rendering and smoother animations to help the Pad 6S Pro 12.4 run cooler and more responsive.
Xiaomi Pad 6S Pro 12.4 Firmware Details
| Device name | Xiaomi Pad 6S Pro 12.4 |
|---|---|
| Codename | sheng (check via fastboot getvar product) |
| Model identifiers | 24018RPACC / 24018RPACG and similar Wi‑Fi variants. |
| Chipset / GPU | Qualcomm Snapdragon 8 Gen 2 with flagship‑class Adreno GPU. |
| Display | 12.4‑inch 3048×2032 LCD, up to 144 Hz refresh, HDR support. |
| Battery / charging | 10,000 mAh battery with 120 W wired fast charging (noted to warm up during high‑power charging). |
| Android / HyperOS | HyperOS 2.0 (Android 15) for OS2.0.21x; HyperOS 3.0.3.0 (Android 16) for WNXCNXM / WNXMIXM. |
| Firmware versions here | OS3.0.3.0.WNXCNXM (CN), OS3.0.3.0.WNXMIXM (Global); OS2.0.212.0.VNXEUXM (EEA), OS2.0.210.0.VNXRUXM (RU), OS2.0.210.0.VNXIDXM (ID). |
| Key HyperOS 3.0.3.0 changes | Better memory allocation and recovery, more efficient CPU frequency management, improved short‑video playback efficiency and a lighter window‑rendering system for lower graphics load and longer battery life. |
| User‑reported issues targeted | Concerns about heat under heavy gaming or benchmarks, mixed feedback on HyperOS 3 lag and design changes, and general HyperOS‑wide battery drain complaints that Xiaomi is addressing through updates. |
| File types in this post | All listed packages are official HyperOS fastboot images (.tgz) for full system flashing from a PC. |
| Flashing tools | Xiaomi Mi Flash Tool (recommended) or flash_all*.bat fastboot scripts on Windows PC. |
| Bootloader | Bootloader unlock is required for fastboot ROMs; recovery/OTA builds are separate and can be used on locked devices. |
Download Official Firmware for Xiaomi Pad 6S Pro 12.4 (sheng)
Here are the official HyperOS factory images for the Xiaomi Pad 6S Pro 12.4 sheng variant, taken from Xiaomi’s servers and trusted firmware trackers, so you can clean‑install Android 16 or stay on a mature Android 15 build for your region.
| Filename | File size | Build date | Build / Android | Region / target | Flashing type | Download |
|---|---|---|---|---|---|---|
| sheng_images_OS3.0.3.0.WNXCNXM_20251105.0000.00_16.0_cn_76a1c68111.tgz | 8.85 GB | 2025‑11‑05 | OS3.0.3.0.WNXCNXM · Android 16 | Xiaomi Pad 6S Pro 12.4 China (CN) | Official fastboot ROM (.tgz) | Download OS3.0.3.0 CN (Xiaomi server) |
| sheng_global_images_OS3.0.3.0.WNXMIXM_20251118.0000.00_16.0_global_f86dcdfaaf.tgz | 7.05 GB | 2025‑11‑18 | OS3.0.3.0.WNXMIXM · Android 16 | Xiaomi Pad 6S Pro 12.4 Global (MI) | Official fastboot ROM (.tgz) | Download OS3.0.3.0 Global (Xiaomi server) |
| sheng_eea_global_images_OS2.0.212.0.VNXEUXM_20251106.0000.00_15.0_eea_3e1d3cda1b.tgz | 6.75 GB | 2025‑11‑06 | OS2.0.212.0.VNXEUXM · Android 15 | Xiaomi Pad 6S Pro 12.4 EEA (EU) | Official fastboot ROM (.tgz) | Download OS2.0.212.0 EEA (Xiaomi server) |
| sheng_ru_global_images_OS2.0.210.0.VNXRUXM_20251106.0000.00_15.0_ru_480360f5de.tgz | 7.36 GB | 2025‑11‑06 | OS2.0.210.0.VNXRUXM · Android 15 | Xiaomi Pad 6S Pro 12.4 Russia (RU) | Official fastboot ROM (.tgz) | Download OS2.0.210.0 RU (Xiaomi server) |
| sheng_id_global_images_OS2.0.210.0.VNXIDXM_20251107.0000.00_15.0_id_d265db7b62.tgz | 6.70 GB | 2025‑11‑07 | OS2.0.210.0.VNXIDXM · Android 15 | Xiaomi Pad 6S Pro 12.4 Indonesia (ID) | Official fastboot ROM (.tgz) | Download OS2.0.210.0 ID (Xiaomi server) |
Flashing Requirements
- Correct codename: In fastboot, run fastboot getvar product; only proceed if it returns sheng, confirming your device is the Pad 6S Pro 12.4 variant targeted by these ROMs.
- Region‑matched build: Use WNXCNXM for China, WNXMIXM for Global, VNXEUXM for EEA, VNXRUXM for RU and VNXIDXM for ID to keep languages, features and OTA updates correct.
- Unlocked bootloader: All listed fastboot images require an unlocked bootloader; recovery ROMs for sheng (not listed here) are for locked devices.
- PC, drivers and tools: Prepare a Windows PC, Xiaomi USB drivers, Xiaomi Mi Flash Tool or fastboot, a reliable USB‑C cable and at least 15–20 GB of free disk space.
- Backup and battery: Charge above 60% and back up apps and media, because a clean fastboot flash with “clean all” will erase internal storage and settings.
How to Flash the Firmware
These sheng fastboot packages are full factory images intended for Mi Flash or Xiaomi’s flash_all*.bat scripts, allowing you to rebuild the system from scratch to solve deep HyperOS problems, performance drops or failed OTA updates.
- Download and extract: Download the correct sheng_…_images_OS2.0.21x/OS3.0.3.0… file from the table above and extract it until you see the images folder with flash_all*.bat scripts.
- Set up Mi Flash: Install Xiaomi USB drivers, open the Mi Flash Tool (full guide) and point it to the extracted firmware folder.
- Enter fastboot mode: Power off the tablet, hold Volume Down + Power to enter fastboot, connect via USB and click “Refresh” in Mi Flash to confirm that the device is detected.
- Flash with “clean all”: Select the clean all option in Mi Flash, then press “Flash” and wait patiently until Mi Flash reports success, avoiding cable movement or shutdown.
- First boot and testing: Reboot into HyperOS; expect a longer first boot as apps are optimized, then test gaming, thermals and battery drain over several cycles to feel the benefit of the new build.
If you prefer command‑line flashing instead of Mi Flash, follow this illustrated flash_all.bat fastboot script tutorial, which explains how to run Xiaomi’s included scripts safely on Windows.
Frequently Asked Questions (FAQs)
What does HyperOS 3.0.3.0 actually improve on the Pad 6S Pro 12.4?
According to the official OS3.0.3.0 changelog, HyperOS 3 refines memory management, CPU scheduling and graphics rendering, which should make the system feel smoother and slightly more efficient than HyperOS 2. It also updates visuals, icons and system animations across many interfaces, plus introduces enhancements for Gallery, Calendar and casting that better fit a large‑screen tablet.
Will these updates fix overheating and battery drain on my Xiaomi Pad 6S Pro 12.4?
Some users and reviewers note that the tablet can get warm under sustained heavy gaming or stress tests and that HyperOS generally has had battery‑drain complaints. HyperOS 3’s efficiency changes, combined with a clean flash and basic optimizations like limiting background apps and capping refresh rate when not needed, usually help reduce temperature spikes and improve endurance.
Is it better to stay on Android 15 (OS2.0.21x) or upgrade to Android 16 (OS3.0.3.0)?
HyperOS 2.0.212.0/210.0 on Android 15 offers a mature, stable base that many users find adequate, while HyperOS 3.0.3.0 on Android 16 adds newer features, visuals and under‑the‑hood optimizations. If you value maximum stability and are risk‑averse, staying on 2.0.21x is reasonable; if you want the latest Android and the full HyperOS 3 experience, OS3.0.3.0 is the better long‑term choice.
Can I cross‑flash another region’s firmware (for example, Global on an EEA tablet)?
With an unlocked bootloader, it is technically possible to flash WNXMIXM on an EEA or other global unit, but regional ROMs are tuned for specific regulations, languages and OTA channels. For most users, staying on the original region code (VNXEUXM, VNXRUXM, VNXIDXM, etc.) is the safest way to avoid network or update issues.
