WE V4 MT6739 Official Stock Firmware Download | Bootloop, FRP, Unbrick Fix

Published:

Is your WE V4 refusing to boot, stuck on the logo, showing FRP lock, or slow after an update? Many WE V4 users complain about persistent hang logo, random freezes, failed boot, FRP lock, pattern or pin issues, fastboot mode errors, and even blank display after OTA updates. Such issues are typical for MediaTek MT6739-based devices, often requiring a full system restore.

The official WE V4 firmware (MT6739, SW_V1.5_180515) can fix all these problems — restoring the phone from brick, fixing bootloops, removing FRP/pattern lock, and reviving dead devices for normal use.

WE V4 MT6739 Firmware Details

Device Name WE V4
Model V4
Chipset MediaTek MT6739
Android Version 8.1 Oreo
Firmware Version SW_V1.5_180515
Build Date 2018-05-15
File Size 1.02GB
File Type ZIP (with scatter file for SP Flash Tool)
Flashing Tool SP Flash Tool (MediaTek)
Other Info Removes FRP, fixes bootloop, hang logo, dead/blank, OTA update faults.
Warning: Flashing the wrong software or using the process incorrectly will brick or damage your WE V4. This file is for the MT6739 version only; do not flash on non-MT6739 variants. Confirm battery is 60%+ and always backup personal data before starting.

Download Official Firmware for WE V4 (MT6739, SW_V1.5_180515)

The firmware below is the official version to unbrick, restore, and remove FRP or pattern lock on your WE V4. Only use if your model matches exactly.

  • 📄 Filename: WE_V4_MT6739_SW_V1.5_180515.zip
  • 📦 Size: 1.02GB
  • 🗓️ Build Date: 2018-05-15
  • 🔢 Build Version: SW_V1.5_180515
  • 🤖 Android Version: 8.1 Oreo
  • ⬇️ Download Link: MediaFire
See also
WE R2 MT6737M Official Stock Firmware Download | Unbrick, FRP, Bootloop Fix


Flashing Requirements

  • WE V4 (MT6739) device (confirm hardware & version)
  • Windows computer
  • USB cable
  • SP Flash Tool (latest version)
  • MediaTek VCOM drivers
  • Extracted firmware zip
  • Complete backup of all user and internal data

How to Flash the Firmware

  • Extract the firmware and SP Flash Tool archive to your PC.
  • Install MediaTek VCOM drivers if you haven’t already.
  • Launch SP Flash Tool, load the scatter file from the firmware folder.
  • Switch off your WE V4, connect it to the PC via USB.
  • Press “Download” in SP Flash Tool and wait for successful flash notification; do not unplug until finished.

For full instructions with images and videos, view our complete SP Flash Tool guide here.


Disclaimer: Flashing can brick, erase, or damage your WE V4 if not done properly. This file is for advanced users; all actions are at your own risk! If you encounter errors, comment below for direct support — the author and forum assume no responsibility for any losses.

How To Flash Different Files

LEAVE A REPLY

Please enter your comment!
Please enter your name here