WE L4 MT6580 Official Firmware Download | Unbrick, FRP, Bootloop & System Fix

Published:

WE L4 users often struggle with persistent “hang logo” or stuck-on-boot, failed update, slowdowns, FRP lock, and system bugs after resets. Reports indicate Mediatek MT6580 models like WE L4 are vulnerable to soft-bricks, loss of network after flashing, and non-responsive touch screens if the wrong firmware or corrupt update is used. Flashing genuine WE L4 stock firmware restores original Android 6.0, removes FRP, can revive dead devices, and brings back lost performance. The file you uploaded matches the tested official release for this model and chipset.

WE L4 MT6580 Firmware Details

Device Name WE L4
Model L4
Chipset Mediatek MT6580
Android Version 6.0 Marshmallow
Firmware Version V1.0.0_20160819
Build Date 2016-08-19
File Size 810MB
File Type ZIP (scatter file and system images for SP Flash Tool)
Flashing Tool SP Flash Tool (MediaTek)
Other Info Fixes “hang logo,” FRP issues, system bugs, dead phone.
Do not cross-flash firmware from other MTK models or chipsets! Using a mismatched version may result in network loss, touch/hardware bugs, or total brick. Always confirm your WE L4 and MT6580 hardware before flashing. Charge your battery over 60% and backup all data.

Download Official Firmware for WE L4 MT6580

Flash only if your WE L4 matches the MT6580 variant and you need to recover from boot failure, FRP lock, or corrupt update.

  • 📄 Filename: We_L4_MT6580_V1.0.0_20160819_6.0.zip
  • 📦 Size: 810MB
  • 🗓️ Build Date: 2016-08-19
  • 🔢 Build Version: V1.0.0_20160819
  • 🤖 Android Version: 6.0 Marshmallow
  • ⬇️ Download Link: MediaFire
See also
WE F20 Official Firmware MT6580 HW1 SW7 19072018 – Repair Boot, Battery, Touch & Camera

Flashing Requirements

  • WE L4 MT6580 device (double check About/Label)
  • Windows PC and USB cable
  • SP Flash Tool (latest stable)
  • MediaTek USB VCOM drivers
  • Extracted original firmware and scatter
  • Full backup of user data

How to Flash the Firmware

  • Extract the firmware ZIP; install MediaTek VCOM drivers.
  • Open SP Flash Tool, load the MT6580 scatter from firmware folder.
  • Select “Download,” or “Firmware Upgrade” if correcting system bugs.
  • Connect powered-off phone via USB, start flash, wait for success. Do not disconnect!
  • Reboot; first boot may take 5-10 minutes. If touch/network fails, flash again or try “Format + Download.”

For step-by-step visual instructions, see the full SP Flash Tool guide here.


Disclaimer: Incorrect flashing, wrong scatter, or battery failure may brick your WE L4. Always use files only for your specific model/chipset. Forum is not responsible for any losses—ask for help in comments if issues arise.

How To Flash Different Files

LEAVE A REPLY

Please enter your comment!
Please enter your name here