The Swipe Virtue (MT6580) was a budget dual-SIM phone that, according to extensive user reports on XDA-Developers and other technical forums, was plagued by a catastrophic network registration bug. The most common and severe complaint was the device suddenly displaying “Invalid SIM” on both SIM slots, completely cutting off cellular connectivity, often after a minor update or factory reset. This issue, coupled with widespread reports of the front camera freezing and Wi-Fi authentication failures, pointed to profound corruption in the modem and connectivity drivers. Flashing the official stock firmware, particularly the later V01.09 build, is the only verified method to rewrite the NVRAM and restore all communication functions.
Swipe Virtue Firmware Details
| Device Name | Swipe Virtue |
|---|---|
| Chipset | MediaTek MT6580 (Quad-core) |
| Key Feature | Dual SIM Support |
| Android Version | 5.1 Lollipop |
| Firmware Version | V01.01.571, V01.05.698, V01.09.1041 |
| Build Date | Oct 10, 2015; Unspecified; Sept 10, 2016 |
| File Size | ~700 MB each |
| File Type | Flashable ZIP (for SP Flash Tool) |
| Flashing Tool | SP Flash Tool |
Download Official Firmware for Swipe Virtue
Option 1: Firmware V01.01.571 (Initial Build)
Size: 752 MB
Build Date: October 10, 2015
Download Link: Google Drive Direct Link
Option 2: Firmware V01.05.698 (Intermediate Build)
Size: 709 MB
Build: V01.05.698
Download Link: MediaFire Direct Link
Option 3: Firmware V01.09.1041 (Recommended Stable Build)
Size: 642 MB
Build Date: September 10, 2016
Download Link: MediaFire Direct Link
Why Flash This Specific Firmware?
- Fix “Invalid SIM” and Network Registration Failure: This is the most critical reason for seeking this firmware. If your Swipe Virtue shows “Invalid SIM” on one or both slots and cannot connect to any network, flashing the stock ROM, especially V01.09.1041, is the definitive solution. It completely rewrites the corrupted NVRAM and modem partitions, restoring the device’s cellular identity as confirmed by numerous user testimonials on forums.
- Resolve Front Camera Freeze and Green Lines: Address the specific bug where the front camera freezes the preview or shows green artifacts. A full firmware flash reinstalls the camera sensor drivers and HAL, clearing the corruption that causes this multimedia failure.
- Solve Wi-Fi Authentication Problems: If your device fails to connect to secured Wi-Fi networks, this process restores the original WLAN driver and configuration files, resolving the persistent authentication and IP obtaining errors reported by many users.
- Recover from a Soft Brick or Bootloop: Unbrick your device if it is stuck on the boot logo, a common consequence of the severe NVRAM corruption that also causes the “Invalid SIM” error.
Some of the Bug / Firmware Fixes
- Firmware V01.09.1041 (September 10, 2016): This final stable build included a comprehensive patch for the NVRAM corruption vulnerability, directly addressing the root cause of the widespread “Invalid SIM” and baseband loss that rendered earlier versions unusable for many.
- Updated the front camera sensor driver (e.g.,
gc2355_mipi_raw) to resolve the viewfinder freeze and green line artifacts that occurred under certain lighting conditions. - Patched the WPA supplicant and Wi-Fi driver to fix the persistent authentication failures with WPA2-protected networks, a common complaint for the V01.01 and V01.05 builds.
- Improved general system stability and power efficiency, reducing the random reboots and battery drain associated with the network stack crashes.
Crucial Prerequisites Before Flashing
- Backup All Data: The flashing process will completely wipe your phone’s internal memory.
- Charge Your Phone: Ensure the battery is charged to at least 60% to avoid shutdowns during the process.
- Install MediaTek VCOM Drivers: You must install the MediaTek USB VCOM drivers on your Windows PC.
- Download the Flashing Tool: You will need the SP Flash Tool.
- Use a Quality USB Cable: For a stable and successful flash, use a reliable USB cable.
How to Flash the Firmware
Flashing the firmware onto your Swipe Virtue requires the SP Flash Tool. Follow these steps:
- Download and extract your chosen firmware ZIP file on your computer.
- Launch the SP Flash Tool and load the scatter file (
MT6580_Android_scatter.txt) from the extracted firmware folder. - Ensure the download agent and scatter file are correctly loaded, then select “Download Only” mode.
- Click the “Download” button in SP Flash Tool.
- Power off your Swipe Virtue completely. Do not connect it to the PC yet.
- Connect the powered-off phone to your computer via USB cable. The tool will automatically detect the device and begin flashing.
- Wait for the process to complete, which will be confirmed with a green circle and a “Download OK” message.
- Disconnect the phone and power it on. The first boot can take 5 to 10 minutes.
For a complete guide with screenshots and more details, please visit our official tutorial: How to Flash Stock Firmware to MediaTek (MTK) Smartphones.
