Swipe Neo Power Indus Firmware Flash File Download [Stock Rom]

The Swipe Neo Power is an entry-level smartphone built on a Spreadtrum chipset, designed for the budget-conscious market in India. Its main selling point was a 2500mAh battery, which was quite large for its compact 4-inch display. However, like many devices in its class with limited RAM (512MB), users across various Indian e-commerce sites frequently reported severe system lag and unresponsiveness during basic multitasking. These performance issues often stem from data corruption and inefficient memory management over time. Flashing the official stock firmware is the most effective method to restore the device to its original, optimized state, resolving these software-induced slowdowns.

Swipe Neo Power Firmware Details

Download Official Firmware for Swipe Neo Power

Why Flash This Specific Firmware?

• Fix Bootloop or “Hang on Logo”: This is the primary solution for a soft-bricked Swipe Neo Power. If your device is stuck on the Swipe logo and refuses to boot, flashing one of these official .pac files will completely restore the operating system.
• Resolve System Lag and Unresponsiveness: Due to its 512MB of RAM, the device is prone to slowing down. A full firmware flash cleans the internal storage and reinstalls a fresh system, eliminating the clutter and corrupted files that cause severe performance degradation.
• Restore Network and IMEI: In cases where the phone has lost its network signal or shows an invalid IMEI after a failed software modification, flashing the stock ROM is a reliable way to restore the original modem and NVRAM files, fixing connectivity issues.
• Remove Viruses or Third-Party Malware: If your phone was infected with malware or unwanted apps installed at a repair shop, this firmware provides a clean, secure, and factory-original software environment.

Some of the Bug / Firmware Fixes

• Firmware V3.0 (July 27, 2017): This is the foundational factory release. It’s the go-to version for unbricking the device, fixing major system crashes, and restoring all original hardware functionalities.
• Firmware V3.3 (November 17, 2017): This updated build provides crucial stability improvements and more optimized power management profiles to enhance battery life and reduce idle drain. It also includes updated security patches from late 2017 for better protection.
• Restores the original kernel, which can fix issues related to incorrect battery percentage readings and slow charging speeds.
• Re-calibrates touch screen drivers, resolving potential unresponsiveness issues in certain areas of the display.

Crucial Prerequisites Before Flashing

• Backup All Data: The flashing process will completely wipe your phone’s internal memory.
• Charge Your Phone: Ensure the battery is charged to at least 60% to avoid shutdowns during the process.
• Install Spreadtrum Drivers: You must install the Spreadtrum SCI USB drivers on your Windows PC for the tool to detect your phone.
• Download the Flashing Tool: You will need the SPD Upgrade Tool.
• Use a Quality USB Cable: For a stable and successful flash, use a reliable USB cable.

How to Flash the Firmware

Flashing the .pac firmware onto your Swipe Neo Power requires the SPD Upgrade Tool. Follow these steps:

1. Download and extract your chosen firmware (e.g., Swipe_Neo_Power_Indus_V3.3_17112017_SPD.zip) on your computer.
2. Launch the SPD Upgrade Tool application.
3. Click the single gear icon (“Load Packet”) and navigate to the extracted firmware folder to select the .pac file.
4. After the file loads successfully, click the play icon (“Start Downloading”).
5. Power off your Swipe Neo Power completely.
6. Press and hold the Volume Down button, and while holding it, connect the phone to your computer via USB.
7. The tool will detect the device and the flashing process will begin automatically. You can release the volume button once you see a progress bar.
8. Wait for the process to finish. It will be confirmed with a green “Passed” message in the tool.
9. Disconnect the phone and power it on. The first boot may take up to 10 minutes, so please be patient.

For a complete guide with screenshots and more details, please visit our official tutorial: How to Use the SPD Upgrade Tool.