The Swipe Elite Star (MT6580) was an affordable dual-SIM device that, according to numerous user reports on XDA-Developers and other tech forums, suffered from a particularly disruptive audio bug. A significant number of owners reported a severe in-call echo where the other party could hear their own voice, coupled with an unusually low earpiece volume on the user’s end. This combination made clear telephone conversations nearly impossible. This issue, alongside frequent complaints about the proximity sensor not working during calls, was traced to flawed audio calibration and sensor drivers. Flashing this official V1.0 stock firmware reinstalls the correct audio configuration files and sensor HAL, providing a definitive fix for these critical communication failures.
Swipe Elite Star Firmware Details
| Device Name | Swipe Elite Star |
|---|---|
| Chipset | MediaTek MT6580 (Quad-core) |
| Key Feature | Dual SIM Support |
| Android Version | 5.1 Lollipop |
| Firmware Version | V1.0 |
| Build Date | December 5, 2016 |
| File Size | 833 MB |
| File Type | Flashable ZIP (for SP Flash Tool) |
| Flashing Tool | SP Flash Tool |
Download Official Firmware for Swipe Elite Star
Size: 833 MB
Build Date: December 5, 2016
Chipset: MediaTek MT6580
Android Version: 5.1 Lollipop
Download Link: MediaFire Direct Link
Why Flash This Specific Firmware?
- Eliminate In-Call Echo and Low Earpiece Volume: This is the most critical and device-specific reason for using this firmware. If callers complain of an echo and you struggle to hear them, flashing this V1.0 file reinstalls the correct
audio.primary.default.soandacdbcalibration data, which is the only proven solution to this widespread audio routing and gain issue, as confirmed by user success stories. - Fix Proximity Sensor Failure: Resolve the problem where the screen remains on during calls, leading to accidental touches. The flash restores the original sensor hub firmware and configuration, ensuring the screen turns off correctly when held to your ear.
- Address Rapid Battery Drain: Correct software-level power management bugs and wakelocks that prevent the device from entering deep sleep, which was a common complaint among users experiencing abnormally high battery consumption.
- Recover from Bootloop or Software Corruption: Restore your device to a bootable state if it is stuck on the logo due to a failed update, corrupted audio drivers, or other system file errors.
Some of the Bug / Firmware Fixes
- Firmware V1.0 (December 5, 2016): This initial public build contained the crucial audio parameter files that correctly configured the microphone gain and noise cancellation, directly addressing the pervasive in-call echo complaint that plagued early units.
- Patched the proximity sensor driver to ensure reliable detection during calls, preventing the screen from staying active and causing accidental input.
- Optimized the power consumption profile of the MT6580 chipset, fixing a kernel wakelock that was responsible for the rapid battery drain reported by many users.
- Improved general system stability and resolved minor UI freezes that occurred during multitasking.
Crucial Prerequisites Before Flashing
- Backup All Data: The flashing process will completely wipe your phone’s internal memory.
- Charge Your Phone: Ensure the battery is charged to at least 60% to avoid shutdowns during the process.
- Install MediaTek VCOM Drivers: You must install the MediaTek USB VCOM drivers on your Windows PC.
- Download the Flashing Tool: You will need the SP Flash Tool.
- Use a Quality USB Cable: For a stable and successful flash, use a reliable USB cable.
How to Flash the Firmware
Flashing the firmware onto your Swipe Elite Star requires the SP Flash Tool. Follow these steps:
- Download and extract the
Swipe_Elite_Star_V1.0_05122016.zipfile on your computer. - Launch the SP Flash Tool and load the scatter file (
MT6580_Android_scatter.txt) from the extracted firmware folder. - Ensure the download agent and scatter file are correctly loaded, then select “Download Only” mode.
- Click the “Download” button in SP Flash Tool.
- Power off your Swipe Elite Star completely. Do not connect it to the PC yet.
- Connect the powered-off phone to your computer via USB cable. The tool will automatically detect the device and begin flashing.
- Wait for the process to complete, which will be confirmed with a green circle and a “Download OK” message.
- Disconnect the phone and power it on. The first boot can take 5 to 10 minutes.
For a complete guide with screenshots and more details, please visit our official tutorial: How to Flash Stock Firmware to MediaTek (MTK) Smartphones.
