Looking to install the stock ROM on your Samsung Galaxy Tab S6 Lite SM-P610? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy Tab S6 Lite SM-P610 Quick Specs
- Display: 10.4-inch TFT LCD display
- Resolution: 1200 x 2000 pixels
- Processor: Octa-core (Exynos 9611)
- RAM: 4GB
- Storage: 64GB or 128GB (expandable via microSDXC up to 1TB)
- Operating System: Android 10 (upgradable to Android 13)
- Main Camera: 8 MP
- Front Camera: 5 MP
- Battery: 7040 mAh (non-removable) with 15W fast charging
- Connectivity: Wi-Fi, Bluetooth 5.0
- Special Features: S Pen support, 3.5mm headphone jack, USB Type-C port
Downloads:
How to Flash Samsung Galaxy Tab S6 Lite SM-P610 with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy Tab S6 Lite SM-P610 to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy Tab S6 Lite SM-P610 Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
