Looking to install the stock ROM on your Samsung Galaxy Tab Active SM-T365M? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy Tab Active SM-T365M Quick Specs
- Display: 8.0-inch TFT display
- Resolution: 1280 x 800 pixels
- Processor: Quad-core 1.2 GHz (Qualcomm Snapdragon 400)
- RAM: 1.5GB
- Storage: 16GB (expandable via microSD up to 64GB)
- Operating System: Android 4.4.2 KitKat
- Main Camera: 3.15 MP with autofocus and LED flash
- Front Camera: 1.2 MP
- Battery: 4450 mAh (Removable)
- Connectivity: Wi-Fi, Bluetooth 4.0, 4G LTE
- Special Features: Rugged design with IP67 water and dust resistance, MIL-STD-810G certification for drop protection, and a C-Pen stylus.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| TPA | T365MUBU1BQC1 | 5.1.1 | Download Panama (SamFW) |
| CHO | T365MUBU1BQC1 | 5.1.1 | Download Chile (SamFW) |
| COO | T365MUBU1BPL1 | 5.1.1 | Download Colombia (SamFW) |
| ZTO | T365MUBU1BPL1 | 5.1.1 | Download Brazil (SamFW) |
How to Flash Samsung Galaxy Tab Active SM-T365M with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy Tab Active SM-T365M to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy Tab Active SM-T365M Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
