Looking to install the stock ROM on your Samsung Galaxy Tab A SM-T595C? This comprehensive guide provides direct download links for the latest firmware flash files, along with clear, step-by-step instructions to get your tablet back in working order.
Use this firmware file to effectively reset your device, fix bootloop issues, bypass password locks, resolve system freezing, and tackle numerous other software-related problems that can slow you down.
Device Overview: Galaxy Tab A SM-T595C
The Samsung Galaxy Tab A 10.5 (model SM-T595C) is a 2018 mid-range tablet with a 10.5-inch TFT display, Snapdragon 450 processor, 3GB RAM, and a large 7,300mAh battery. This specific variant, SM-T595C, was released primarily in Asian markets like China (CHC) and Hong Kong (TGY), and supports 4G LTE connectivity.
Out of the box, the SM-T595C shipped with Android 8.1 Oreo and later received updates up to Android 10, which introduced One UI features, performance enhancements, and security patches.
Downloads: SM-T595C Firmware Flash Files
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| CHC | T595CZCU3CVH1 | 10 | Download China (SamFW) |
| TGY | T595CZHU3CVG4 | 10 | Download Hong Kong SAR (SamFW) |
CSC Explanation:
CHC = China firmware – for units sold in Mainland China
TGY = Hong Kong firmware – includes Google Play Services and more open features
Each firmware listed above includes the complete 4-file package (AP, BL, CP, CSC) needed for flashing via Odin.
How to Flash the Samsung Galaxy Tab A SM-T595C Firmware [Stock ROM]
Okay, you finally got the correct Samsung Galaxy Tab A SM-T595C firmware. Now what? Time to flash it (no, not that kind of flash). Whether your tablet’s stuck in a boot loop, totally bricked, or you want to upgrade/downgrade your system, flashing is your BFF.
Good news: Samsung made this low-key easy. The steps are the same for most of their tablets and phones, so once you’ve done it once, you’re golden.
This guide has everything you need – tools, prep, and super clear steps. Just follow it closely, don’t skip anything, and you’ll be back to what you were doing in no time.
Complete Galaxy Tab A SM-T595C Flashing Instructions Using Odin
Before You Begin Flashing
- ✅ Charge your tablet to at least 50%
- ✅ Use an original or high-quality USB cable
- ✅ Backup your data — this process will wipe everything
- ✅ Install the latest Samsung USB Drivers
- ✅ Extract the
.zipfirmware file to get.tar.md5files
Common Firmware Flashing Issues (And Fixes)
| ❌ Issue | ✅ Solution |
|---|---|
Odin stuck at SetupConnection |
Try another USB port or cable |
FAIL! SHA256 is invalid |
Re-download the firmware file |
| Device reboots to recovery | Wipe data/factory reset manually |
Odin shows FAIL (Auth) |
You may be trying to downgrade or mix CSCs – check version compatibility |
FAQs About Flashing Galaxy Tab A SM-T595C
Q: Can I downgrade to Android 9 or 8.1 on SM-T595C?
A: You may be able to downgrade, but only if the bootloader version (e.g., U3 in CVH1) matches or is lower.
Q: Will flashing affect Knox or warranty?
A: If you’re flashing official firmware using Odin, Knox status should remain intact.
Q: Which CSC should I use?
A: Stick with the original CSC your tablet came with — CHC for China, TGY for Hong Kong. Using the wrong one may affect local features or connectivity.
You’re Good to Go!
With the right firmware and Odin in hand, you’re just a few clicks away from reviving your Galaxy Tab A SM-T595C. Whether you’re fixing a soft-brick, speeding up performance, or starting fresh, flashing is one of the most powerful tools in your Android toolbox.
