Looking to install the stock ROM on your Samsung Galaxy Tab A SM-P550? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy Tab A SM-P550 Quick Specifications
- Display: 9.7-inch TFT, 1024 x 768 pixels (~132 ppi density)
- Processor: Qualcomm Snapdragon 410, Quad-core 1.2 GHz
- RAM: 2GB
- Storage: 16GB or 32GB internal, expandable via microSDXC up to 128GB
- Operating System: Launched with Android 5.0 Lollipop, upgradable to Android 7.1.1 Nougat
- Rear Camera: 5 MP with autofocus
- Front Camera: 2 MP
- Battery: Non-removable Li-Ion 6000 mAh
- Connectivity: Wi-Fi 802.11 a/b/g/n, Bluetooth 4.1, GPS, microUSB 2.0
- Other Features: S Pen support, Accelerometer, Hall sensor, RGB light sensor, 3.5mm audio jack
The Samsung Galaxy Tab A SM-P550 is a Wi-Fi only tablet that was part of the Galaxy Tab A 9.7 lineup. It is distinguished by the inclusion of an S Pen stylus, making it a versatile device for both productivity and creative tasks. With its 4:3 aspect ratio display, it is well-suited for document viewing and web Browse.
Downloads:
How to Flash Samsung Galaxy Tab A SM-P550 with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy Tab A SM-P550 to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy Tab A SM-P550 Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
Read the Complete Odin Flashing Guide
