Looking to install the stock ROM on your Samsung Galaxy Tab 4 SM-T533? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy Tab 4 SM-T533 Quick Specs
- Display: 10.1-inch TFT display
- Resolution: 1280 x 800 pixels
- Processor: 1.2 GHz Quad-Core
- RAM: 1.5GB
- Storage: 16GB (expandable via microSD up to 64GB)
- Operating System: Android 4.4.4 KitKat
- Main Camera: 3.15 MP
- Front Camera: 1.3 MP
- Battery: 6800 mAh
- Connectivity: Wi-Fi, Bluetooth 4.0
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| BTU | T533XXS1BPL2 | 5.1.1 | Download United Kingdom (SamFW) |
| DBT | T533XXS1BRI2 | 5.1.1 | Download Germany (SamFW) |
| XEF | T533XXS1BPL2 | 5.1.1 | Download France (SamFW) |
How to Flash Samsung Galaxy Tab 4 SM-T533 with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Samsung Galaxy Tab 4 SM-T533 Download Mode: Power off the device. Enter Download Mode by holding Volume Down + Home + Power) while connecting the phone to your PC via USB.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load Samsung Galaxy Tab 4 SM-T533 Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
