Looking to install the stock ROM on your Samsung Galaxy S6 Edge SM-G925A? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy S6 Edge SM-G925A Quick Specs
- Display: 5.1-inch Super AMOLED curved edge display
- Resolution: 1440 x 2560 pixels
- Processor: Octa-core (4×2.1 GHz & 4×1.5 GHz) – Exynos 7420
- RAM: 3GB
- Storage: 32GB, 64GB, or 128GB (not expandable)
- Operating System: Android 5.0.2 Lollipop (upgradable to 7.0 Nougat)
- Main Camera: 16 MP with optical image stabilization (OIS) and LED flash
- Front Camera: 5 MP
- Battery: 2600 mAh (non-removable) with wireless charging and fast charging support
- Connectivity: Wi-Fi, Bluetooth 4.1, 4G LTE
- Special Features: Fingerprint sensor, Corning Gorilla Glass 4 protection, and a metal and glass body.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| ATT | G925AUCS7ERC1 | 7.0 | Download AT&T (USA) (Google Drive) |
How to Flash Samsung Galaxy S6 Edge SM-G925A with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy S6 Edge SM-G925A to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy S6 Edge SM-G925A Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
