Looking to install the stock ROM on your Samsung Galaxy Note Pro SM-P902? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy Note Pro SM-P902 Quick Specs
- Display: 12.2-inch Super Clear LCD display
- Resolution: 2560 x 1600 pixels
- Processor: Octa-core (4×1.9 GHz & 4×1.3 GHz) – Exynos 5420
- RAM: 3GB
- Storage: 32GB or 64GB (expandable via microSD up to 64GB)
- Operating System: Android 4.4 KitKat (upgradable to 5.0.2 Lollipop)
- Main Camera: 8 MP with autofocus and LED flash
- Front Camera: 2 MP
- Battery: 9500 mAh (non-removable)
- Connectivity: Wi-Fi, Bluetooth 4.0, 3G
- Special Features: S Pen support, Infrared port, USB 3.0 port
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| TUR | P902JVUAOJ3 | 5.0.2 | Download Turkey (Google Drive) |
How to Flash Samsung Galaxy Note Pro SM-P902 with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy Note Pro SM-P902 to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy Note Pro SM-P902 Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
