Looking to install the stock ROM on your Samsung Galaxy Note 7 SM-N930V? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy Note 7 SM-N930V Quick Specifications
- Display: 5.7-inch Quad HD Super AMOLED, 2560 x 1440 pixels (~515 ppi density)
- Processor: Qualcomm Snapdragon 820, Quad-core
- RAM: 4GB
- Storage: 64GB internal, expandable via microSDXC up to 256GB
- Operating System: Launched with Android 6.0.1 Marshmallow, upgradable to Android 7.0 Nougat
- Rear Camera: 12 MP with Dual Pixel PDAF and Optical Image Stabilization (OIS)
- Front Camera: 5 MP with iris scanner
- Battery: Non-removable Li-Ion 3500 mAh with Quick Charge 2.0 and wireless charging support
- Connectivity: 4G LTE, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2, NFC, USB Type-C
- Other Features: S Pen stylus, Iris scanner, front-mounted fingerprint sensor, IP68 dust/water resistance, 3.5mm audio jack
The Samsung Galaxy Note 7 SM-N930V is a specific carrier-locked variant of the Note 7 for Verizon Wireless in the U.S. It is powered by the Snapdragon 820 processor and features a dual-curved display, an advanced camera, and the innovative iris scanner for enhanced security.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| PHE | N930VVRS2APHE | 6.0.1 | Download Spain (Google Drive) |
How to Flash Samsung Galaxy Note 7 SM-N930V with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy Note 7 SM-N930V to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy Note 7 SM-N930V Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
