Looking to install the stock ROM on your Samsung Galaxy Note 7 Duos SM-N9300? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy Note 7 Duos SM-N9300 Quick Specifications
- Display: 5.7-inch Quad HD Super AMOLED, 2560 x 1440 pixels (~518 ppi density)
- Processor: Exynos 8890 Octa (Global) or Qualcomm Snapdragon 820 (China/USA), both Octa-core
- RAM: 4GB
- Storage: 64GB internal, expandable via microSDXC (uses a shared SIM slot) up to 256GB
- Operating System: Launched with Android 6.0.1 Marshmallow, planned upgrade to Android 7.0 Nougat
- Rear Camera: 12 MP with Dual Pixel PDAF, OIS, and LED flash
- Front Camera: 5 MP
- Battery: Non-removable Li-Po 3500 mAh with Quick Charge 2.0 and wireless charging support
- Connectivity: 4G LTE, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2, GPS, NFC, USB Type-C 3.1
- Other Features: Dual-SIM support, S Pen, Iris scanner, Fingerprint sensor, IP68 dust/water resistance, 3.5mm audio jack
The Samsung Galaxy Note 7 Duos SM-N9300 is the dual-SIM variant of the ill-fated Galaxy Note 7. This version was primarily sold in regions like China and Hong Kong. Despite its historical issues, the device was praised for its premium design, including a beautiful curved Quad HD display and a suite of advanced features like an iris scanner, S Pen, and water resistance.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| CHC | N9300ZCU2BPJ4 | 6.0.1 | Download China (Google Drive) |
| TGY | N9300ZHU3BQB1 | 6.0.1 | Download Hong Kong (SamFW) |
How to Flash Samsung Galaxy Note 7 Duos SM-N9300 with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy Note 7 Duos SM-N9300 to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy Note 7 Duos SM-N9300 Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
