Looking to install the stock ROM on your Samsung Galaxy Note 4 SM-N910R4? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy Note 4 SM-N910R4 Quick Specifications
- Display: 5.7-inch Quad HD Super AMOLED, 2560 x 1440 pixels (~518 ppi density)
- Processor: Qualcomm Snapdragon 805, Quad-core 2.7 GHz
- RAM: 3GB
- Storage: 32GB internal, expandable via microSDXC up to 128GB
- Operating System: Launched with Android 4.4.4 KitKat, upgradable to Android 6.0.1 Marshmallow
- Rear Camera: 16 MP with Optical Image Stabilization (OIS) and LED flash
- Front Camera: 3.7 MP with f/1.9 aperture
- Battery: Removable Li-Ion 3220 mAh with Quick Charge 2.0 support
- Connectivity: 4G LTE, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.1, NFC, microUSB 2.0
- Other Features: S Pen stylus, Fingerprint scanner, heart rate sensor, UV sensor, and an Infrared port
The Samsung Galaxy Note 4 SM-N910R4 is a specific carrier-locked variant of the Note 4 for U.S. Cellular. It features the Qualcomm Snapdragon 805 processor, a high-resolution display, and a full suite of features including the S Pen and various health-related sensors.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| USC | N910R4TYS1CQC1 | 6.0.1 | Download US Cellular (Google Drive) |
How to Flash Samsung Galaxy Note 4 SM-N910R4 with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy Note 4 SM-N910R4 to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy Note 4 SM-N910R4 Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
