Looking to install the stock ROM on your Samsung Galaxy M11 SM-M115F? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy M11 SM-M115F Quick Specifications
- Display: 6.4-inch HD+ PLS TFT LCD, 720 x 1560 pixels (~268 ppi density)
- Processor: Qualcomm Snapdragon 450, Octa-core 1.8 GHz
- RAM: 3GB or 4GB
- Storage: 32GB or 64GB internal, expandable via microSDXC up to 512GB
- Operating System: Launched with Android 10, upgradable to Android 12
- Rear Camera: Triple camera system with 13 MP wide, 5 MP ultrawide, and 2 MP depth sensors
- Front Camera: 8 MP
- Battery: 5000 mAh non-removable with 15W fast charging
- Connectivity: 4G LTE, Wi-Fi 802.11 b/g/n, Bluetooth 4.2, USB Type-C 2.0
- Other Features: Rear-mounted fingerprint sensor, 3.5mm headphone jack, FM radio
The Samsung Galaxy M11 SM-M115F is an international variant of the Galaxy M11, targeting budget-conscious consumers. It is known for its large display, versatile triple-camera setup, and a long-lasting 5000 mAh battery.
Downloads:
How to Flash Samsung Galaxy M11 SM-M115F with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy M11 SM-M115F to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy M11 SM-M115F Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
