Looking to install the stock ROM on your Samsung Galaxy M01 SM-M015G? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy M01 SM-M015G Quick Specifications
- Display: 5.7-inch HD+ PLS TFT LCD, 720 x 1520 pixels (~294 ppi density)
- Processor: Qualcomm Snapdragon 439, Octa-core
- RAM: 3GB
- Storage: 32GB internal, expandable via microSDXC up to 512GB
- Operating System: Launched with Android 10, upgradable to Android 11
- Rear Camera: Dual camera system with 13 MP wide and 2 MP depth sensors
- Front Camera: 5 MP
- Battery: 4000 mAh non-removable
- Connectivity: 4G LTE, Wi-Fi 802.11 b/g/n, Bluetooth 4.2, microUSB 2.0
- Other Features: Face unlock, 3.5mm headphone jack, FM radio
The Samsung Galaxy M01 SM-M015G is a budget-friendly smartphone primarily released for the Indian and Southeast Asian markets. It offers essential features and a decent battery life for everyday use.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| BKD | M015GXXU5CWL1 | 12 | Download Bangladesh (SamFW) |
| INS | M015GXXU5CWL1 | 12 | Download India (SamFW) |
| NPB | M015GXXU5CWL1 | 12 | Download NPB (SamFW) |
| SLK | M015GXXU5CWL1 | 12 | Download Sri Lanka (SamFW) |
How to Flash Samsung Galaxy M01 SM-M015G with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy M01 SM-M015G to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy M01 SM-M015G Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
