Looking to install the stock ROM on your Samsung Galaxy M01 Core SM-M013F? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy M01 Core SM-M013F Quick Specifications
- Display: 5.3-inch HD+ PLS TFT LCD, 720 x 1480 pixels (~311 ppi density)
- Processor: MediaTek MT6739, Quad-core 1.5 GHz
- RAM: 1GB or 2GB
- Storage: 16GB or 32GB internal, expandable via microSDXC (dedicated slot)
- Operating System: Launched with Android 10 (Go edition)
- Rear Camera: 8 MP with autofocus and LED flash
- Front Camera: 5 MP
- Battery: 3000 mAh non-removable
- Connectivity: 4G LTE, Wi-Fi 802.11 b/g/n, Bluetooth 5.0, microUSB 2.0
- Other Features: 3.5mm headphone jack, FM radio
The Samsung Galaxy M01 Core SM-M013F is an entry-level smartphone designed for emerging markets. It runs on Android 10 (Go edition), which is optimized for devices with low RAM, and offers a compact design for basic daily use.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| BKD | M013FDDU7AWA1 | N/A | Download Bangladesh (SamFW) |
| INS | M013FDDU7AWA1 | N/A | Download India (SamFW) |
| NPB | M013FDDU7AWA1 | N/A | Download Nepal (SamFW) |
| SLK | M013FDDU7AWA1 | N/A | Download Sri Lanka (SamFW) |
How to Flash Samsung Galaxy M01 Core SM-M013F with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy M01 Core SM-M013F to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy M01 Core SM-M013F Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
