Looking to install the stock ROM on your Samsung Galaxy J3 Pro SM-J3119S? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy J3 Pro SM-J3119S Quick Specifications
- Display: 5.0-inch HD Super AMOLED, 1280 x 720 pixels (~294 ppi density)
- Processor: Qualcomm Snapdragon 410, Quad-core 1.2 GHz
- RAM: 2GB
- Storage: 16GB internal, expandable via microSDXC
- Operating System: Launched with Android 5.1 Lollipop
- Rear Camera: 8 MP with autofocus and LED flash
- Front Camera: 5 MP
- Battery: Removable Li-Ion 2600 mAh
- Connectivity: 4G LTE, Wi-Fi 802.11 b/g/n, Bluetooth 4.1, microUSB 2.0
- Other Features: Dual-SIM support, FM radio
The Samsung Galaxy J3 Pro SM-J3119S is a specific variant of the Galaxy J3 Pro that was released for the Chinese market. It features a Super AMOLED display and is powered by a Qualcomm Snapdragon processor.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| CHC | J3119SZCU1ARH2 | 5.1 | Download China (Google Drive) |
How to Flash Samsung Galaxy J3 Pro SM-J3119S with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy J3 Pro SM-J3119S to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy J3 Pro SM-J3119S Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
