Looking to install the stock ROM on your Samsung Galaxy A51 SM-S515DL? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy A51 SM-S515DL Quick Specs (2020)
- Display: 6.5-inch Super AMOLED display
- Resolution: 1080 x 2400 pixels
- Processor: Octa-core (4×2.3 GHz & 4×1.7 GHz) – Exynos 9611
- RAM: 4GB
- Storage: 128GB (expandable via microSD up to 512GB)
- Operating System: Android 10 (upgradable to Android 13)
- Main Camera: Quad-camera setup with a 48 MP wide lens, 12 MP ultrawide, 5 MP macro, and a 5 MP depth sensor
- Front Camera: 32 MP wide lens
- Battery: 4000 mAh (non-removable) with 15W fast charging
- Connectivity: Wi-Fi, Bluetooth 5.0, 4G LTE
- Special Features: Under-display optical fingerprint sensor, USB Type-C port
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| TFA | S515DLUDSFFXA1 | 13 | Download TracFone (AT&T network) (SamFW) |
| TFC | S515DLUDSFFXA1 | 13 | Download TracFone (CDMA – Verizon) (SamFW) |
| TFN | S515DLUDSFFXA1 | 13 | Download TracFone (T-Mobile network) (SamFW) |
| TFV | S515DLUDSFFXA1 | 13 | Download TracFone (Verizon) (SamFW) |
How to Flash Samsung Galaxy A51 SM-S515DL with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy A51 SM-S515DL to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy A51 SM-S515DL Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
