Looking to install the stock ROM on your Samsung Galaxy Note 3 SM-N750S? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy Note 3 Neo SM-N750S Quick Specifications
- Display: 5.5-inch HD Super AMOLED, 1280 x 720 pixels (~267 ppi density)
- Processor: Samsung Exynos 5 Hexa 5260, Hexa-core (2×1.7 GHz Cortex-A15 & 4×1.3 GHz Cortex-A7)
- RAM: 2GB
- Storage: 16GB internal, expandable via microSDXC up to 64GB
- Operating System: Launched with Android 4.3 Jelly Bean, upgradable to Android 5.1.1 Lollipop
- Rear Camera: 8 MP with autofocus and LED flash
- Front Camera: 2 MP
- Battery: Removable Li-Ion 3100 mAh
- Connectivity: 4G LTE, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.0, NFC, microUSB 2.0
- Other Features: S Pen stylus, Infrared port, various sensors including accelerometer and gyro-sensor
The Samsung Galaxy Note 3 Neo SM-N750S is a specific variant of the Note 3 Neo for the South Korean market. It is a more budget-friendly version of the standard Note 3, retaining the core S Pen features while featuring a slightly smaller and lower-resolution display and a different processor.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| SKC | N750SKSS1CRK3 | 5.1 | Download (SK Telecom) South Korea (Google Drive) |
How to Flash Samsung Galaxy Note 3 SM-N750S with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy Note 3 SM-N750S to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy Note 3 SM-N750S Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
