MyPhone MYA13 Firmware Flash File Download [Stock Rom]

The MyPhone MYA13 is an entry-level Android smartphone based on the MediaTek MT6580 quad-core platform, running Android 7.0 Nougat with 1GB of RAM and 8GB of internal storage. As is common with low-spec devices, users often experience significant performance degradation over time, including severe lag, constant application crashes, system-wide freezing, and battery-related issues like random shutdowns. More serious problems like bootloops (where the phone is stuck on the MyPhone logo or endlessly restarts) are also prevalent. A clean re-flash of the official scatter firmware is the most reliable way to fix these deep-seated software problems.

This is a scatter-based ROM and must be flashed using the SP Flash Tool on a Windows computer. This process will erase all data on the device.

MyPhone MYA13 Firmware Details

Please verify your device’s specifications against this table to ensure compatibility before flashing:

Download Official Firmware for MyPhone MYA13

• Build: V1.19_20181217
  • File Name: MyPhone_MYA13_MT6580_V1.19_20181217.zip
  • Size: 813MB
  • 🔗 Download Link: Download (MediaFire)

Why Flash This Specific Firmware?

• Recover from Bootloop and Freezing: If your phone is stuck at the MyPhone logo, endlessly restarting, or completely frozen, a full scatter flash will repair the corrupted system partitions.
• Fix App Crashes, Lag, and System Bugs: Wipes all software clutter, rogue applications, and buggy configurations that cause instability and poor performance.
• Repair Camera, Battery, and Connectivity Issues: A clean firmware installation can resolve problems like the camera failing to launch, Wi-Fi or Bluetooth connectivity dropping, or random shutdowns caused by software conflicts.
• Unbrick or Restore an Unresponsive Device: For a “dead” phone that is still detected by a PC, flashing the stock ROM is the primary method for revival, provided there is no hardware failure.

Crucial Prerequisites Before Flashing

Backup all important data before you begin. This procedure will completely erase the phone’s internal storage.

• The latest version of SP Flash Tool.
• MediaTek VCOM/Preloader USB drivers installed on your Windows PC.

How to Flash the Firmware

1. Download and extract the MyPhone_MYA13_MT6580_V1.19_20181217.zip file.
2. Install the necessary MediaTek VCOM/Preloader USB drivers on your computer.
3. Launch the SP Flash Tool application (flash_tool.exe).
4. Click on the “Scatter-loading” button and select the MT6580_Android_scatter.txt file from the extracted firmware folder.
5. Set the flashing mode to “Download Only” for a standard repair.
6. Power off your MyPhone MYA13 completely (remove and re-insert the battery if possible).
7. Click the “Download” button in SP Flash Tool, then connect the phone to your computer with a USB cable. The flashing process should begin automatically.
8. Wait for the green checkmark indicating “Download OK” before disconnecting the device.

For a detailed visual guide, see: How to Flash Stock Firmware to Mediatek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced process that erases all user data and carries a risk of permanently damaging your device if done incorrectly. Proceed with caution and at your own risk.