Mobicel Fame Firmware Flash File Download [Stock Rom]

The Mobicel Fame is an affordable Android Go smartphone running on the Spreadtrum SC7731E quad-core processor with 1GB RAM and 8GB internal storage. On this lightweight hardware, performance is often plagued by app crashes, system lag, slowdowns, battery malfunction, camera bugs, dropped Wi-Fi, and especially persistent bootloops or random freezing (device stuck at Mobicel logo, unresponsive screen, or infinite restart). When these faults persist despite factory resets, a full clean firmware installation with SPD Upgrade Tool is the only reliable path to restoring basic system stability.

All Mobicel Fame PAC files must be flashed only with SPD Upgrade Tool or compatible Spreadtrum/Unisoc flashing software.

Mobicel Fame Firmware Details

Check hardware/specs for compatibility before flashing:

Download Official Firmware for Mobicel Fame

• Build: 190220_SPD
  • File Name: Mobicel_Fame_190220_SPD.zip
  • Size: 891MB
  • 🔗 Download Link: Download (Google Drive)

Why Flash This Specific Firmware?

• Bootloop and Startup Recovery: Device stuck at Mobicel/Android logo, unresponsive or endless restarts—PAC flash restores system partitions to original state.
• Fix Persistent Freezing, App Crashes, and Lag: A new firmware cleans up core system files, eliminating buggy/corrupted apps and internal errors.
• Repair Camera, Battery, and Wireless Issues: Camera & battery malfunctions, dropping Wi-Fi or Bluetooth, and random resets are often resolved with a new firmware and up-to-date drivers.
• Unbrick or Recover Non-responsive Phones: Full PAC reflash revives many “bricked” or dead units that can enter download mode, unless there’s severe hardware defect.

Crucial Prerequisites Before Flashing

Backing up all user content is essential—this process erases everything.

• SPD Upgrade Tool for PAC firmware (Windows only).
• Spreadtrum/Unisoc USB drivers must be installed on PC.

How to Flash the Firmware

1. Download and extract Mobicel_Fame_190220_SPD.zip.
2. Install all required Spreadtrum/Unisoc USB drivers.
3. Open SPD Upgrade Tool (UpgradeDownload.exe).
4. Click gear icon, select .pac file from firmware folder.
5. Ensure phone is off (remove battery if possible).
6. Hold Volume Down and connect device via USB.
7. Click “Start Downloading”, wait for green “Passed”.

Step-by-step visuals: How to Use the SPD Upgrade Tool

Disclaimer: Firmware flashing is risky, erases all data, and can brick your device if interrupted or done incorrectly. Proceed only if fully prepared—no liability for hardware failure/loss.