M-Horse N5 Firmware Flash File Download [Stock Rom]

The M-Horse N5 is a budget Android phone built on a Spreadtrum chipset, running Android 5.1 Lollipop. As is common with devices in this category, it is susceptible to a variety of software issues that can render it useless. Users of M-Horse and other Spreadtrum-based phones often report problems such as being stuck in a bootloop, dealing with pre-installed viruses or “sexual apps,” or being locked out of their own device due to Google’s Factory Reset Protection (FRP).

When a factory reset fails to solve these issues—or isn’t possible at all—the only reliable solution is to perform a full firmware reinstallation. This guide provides the official stock ROM for the M-Horse N5. As this is a Spreadtrum device, the firmware is a .pac file that must be flashed using the SPD Upgrade Tool (also known as ResearchDownload).

M-Horse N5 Firmware Details

Below are the technical details for the M-Horse N5 firmware. This package will restore the phone to its original factory software. Flashing requires the SPD Upgrade Tool.

Download Official Firmware for M-Horse N5

This is the official factory firmware for the M-Horse N5. The zip archive contains the .pac file needed for flashing.

• Build: V2_20170208
  • File Name: M-Horse_N5_V2_20170208_5.1_SPD.zip
  • Size: 471MB
  • 🔗 Download Link: Download (Google Drive)

Why Flash This Specific Firmware?

Flashing the official stock ROM provides direct solutions to real-world problems reported by users of M-Horse and similar devices:

• Bypass Google FRP Lock: If you performed a factory reset and are now stuck on a screen asking for “a Google account previously synced on this device,” you are facing Factory Reset Protection (FRP) lock. Flashing this official firmware with the SPD Tool is a powerful method used by technicians to completely wipe the device and remove this lock when you can’t remember the original account details.
• Fix “No Command” Error in Recovery: A common issue on these devices is seeing an Android robot with a “No Command” error when trying to access recovery mode, making a factory reset impossible. This firmware flash bypasses the broken recovery partition entirely and installs a fresh, working system.
• Remove Pre-installed Malware or “Sexual Apps”: Budget devices can sometimes ship with malware embedded in the system that a factory reset cannot remove. If you are experiencing strange pop-ups, random app installations, or other signs of infection, a full firmware flash is the only way to guarantee a completely clean device.
• Resolve a “Hang on Logo” State: When a phone freezes on the M-Horse logo and never fully boots, it often indicates a corrupt system file. This firmware package replaces every critical OS file, fixing the bootloop and allowing the phone to start normally again.

Crucial Prerequisites Before Flashing

This procedure will erase all data. Back up your files if possible.

• The latest version of the SPD Upgrade Tool.
• The correct Spreadtrum USB drivers installed on your Windows PC.

How to Flash the Firmware

This is a Spreadtrum device and must be flashed with the SPD Upgrade Tool by loading the .pac file.

1. Download and extract the firmware file (M-Horse_N5_V2_20170208_5.1_SPD.zip) to find the .pac file inside.
2. Install the Spreadtrum drivers on your PC.
3. Launch the SPD Upgrade Tool, click the gear icon (‘Load packet’), and select the firmware’s .pac file.
4. Click the ‘Start downloading’ (Play) button to put the tool into standby mode.
5. Power off your phone completely. Press and hold the Volume Down key, then connect it to the PC with a USB cable to begin flashing.

For a complete, step-by-step tutorial with screenshots, please follow our master guide:

→ How to Use the SPD Upgrade Tool to Flash Your Smartphone

Disclaimer: Flashing a Spreadtrum device carries inherent risks. Using the wrong firmware or having the process interrupted can permanently brick your phone. We are not responsible for any damage or data loss. Proceed with extreme caution.