Download LYF Wind 6 (LS-5009) Stock Firmware (QFIL ROM)

The LYF Wind 6 (model LS-5009) was an ultra-budget 4G smartphone from 2016, designed to be an affordable entry into the 4G market. It features extremely limited hardware, including a Qualcomm Snapdragon 210 processor and just 1GB of RAM, running on Android 5.1 Lollipop. Due to these minimal specifications, the device is highly prone to critical software failures, most notably getting stuck on the LYF logo during startup (a “bootloop”). For owners facing this or other issues like a dead device or severe lag, flashing the official stock firmware is the only reliable solution.

Crucial Safety Warning: This is a Qualcomm-powered device. The firmware must be flashed using the QPST Flash Tool (QFIL). Do NOT attempt to use SP Flash Tool or any other software, as it is incompatible and will not work.

LYF Wind 6 (LS-5009) Firmware Details

Below are the key specifications for the LYF Wind 6. Note the Qualcomm chipset, which requires the specific QFIL flashing procedure.

Download Official Firmware for LYF Wind 6 (LS-5009)

• • Software Version: V209_160115
    • File Name: Lyf_Wind_6_LS_5009_V209_160115.zip
    • Size: 1.5 GB
    • Build Date: Jan 15, 2016
    • 🔗 Download Link: Download (MediaFire)

• Software Version: V213_160111
  • File Name: Lyf_Wind_6_LS_5009_V213_160111.zip
  • Size: 960 MB
  • Build Date: Jan 11, 2016
  • 🔗 Download Link: Download (MediaFire)

Why Flash the Stock Firmware on Your LYF Wind 6?

Flashing the official stock ROM is the best way to fix the specific, widely-reported issues with this model:

• Fix Bootloop (Stuck on Logo): A clean installation of this Android 5.1 firmware is the definitive fix for a phone that powers on but never moves past the LYF startup logo.
• Unbrick a Dead Phone: Flashing the firmware is often the only way to revive a Lyf Wind 6 that has become completely unresponsive or “hard bricked.”
• Fix Extreme Performance Lag: A fresh installation of the factory OS will resolve the severe system-wide lag caused by running Android 5.1 on just 1GB of RAM.
• Resolve Common Lollipop Bugs: This can fix widespread issues like abnormal battery drain, Wi-Fi connectivity problems, and random app crashes.
• Remove Screen Lock: A full firmware flash will reset the device and remove any forgotten PIN, pattern, or password lock.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the phone’s internal storage.

• The latest version of the QPST Flash Tool (with QFIL).
• The correct Qualcomm HS-USB QDLoader 9008 drivers installed on your PC.

How to Flash the Firmware

This firmware must be installed using the QFIL application. The process involves booting the phone into EDL mode and loading the specific programmer and XML files from the firmware.

1. Download and extract your chosen firmware package (e.g., `Lyf_Wind_6_…_160115.zip`).
2. Install the Qualcomm HS-USB QDLoader 9008 drivers and the QPST Flash Tool on your PC.
3. Boot your phone into EDL Mode (usually by holding Volume Up + Volume Down and connecting the USB cable).
4. Launch QFIL and load the programmer file (e.g., `prog_emmc_firehose_8909.mbn`) and the `rawprogram0.xml` and `patch0.xml` files from the firmware folder.
5. Click “Download” to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Qualcomm Firmware Using QFIL

Disclaimer: Flashing firmware is an advanced procedure. Using the wrong tool or files can permanently damage your device. Proceed with extreme caution. We are not responsible for any data loss or hardware issues.