Leagoo S8 Firmware Flash File Download [Stock Rom]

The Leagoo S8 was a mid-range smartphone from late 2017, designed as a budget-friendly alternative to the Samsung Galaxy S8, featuring a similar 18:9 aspect ratio display. It boasted impressive features for its price, including a 5.7-inch screen, a MediaTek MT6750T octa-core processor, 3GB of RAM, and a quad-camera system. However, like many devices that received the Android 7.0 Nougat update, it was susceptible to software bugs, including performance issues, battery drain, and GPS problems. For owners facing these frustrations, reinstalling the official stock firmware is the best way to get a clean, stable, and fully functional operating system.

This guide provides an official stock ROM package for the Leagoo S8, allowing you to perform a complete software reinstallation to fix these known issues.

Leagoo S8 Firmware Details

Below are the key specifications for the Leagoo S8. This firmware will restore the device to its original Android 7.0 Nougat software.

Why Flash the Stock Firmware on Your Leagoo S8?

Flashing this official July 2018 build of the stock ROM is the best way to address the specific, widely-reported issues with this device and its software:

• Fix GPS Not Working: A clean installation of this Android 7.0 firmware is the most effective way to resolve a known bug where the GPS fails to lock onto a signal or drops connection, a common issue reported by users after earlier software updates.
• Resolve Abnormal Battery Drain: This firmware helps fix software inefficiencies from the Nougat OS that can cause the 3050mAh battery to drain faster than expected, restoring the phone’s intended endurance.
• Improve System Performance: By reinstalling the original, optimized Leagoo OS 4.0, you can eliminate the lag and stuttering that develops over time from software bloat and corrupted cache files.
• Stop App Crashes: Solves persistent “force close” errors and general instability by restoring the operating system to a clean, uncorrupted state.
• Fix Bootloop Errors: The only reliable method to fix a phone that is stuck on the Leagoo startup logo and will not boot.
• Unbrick Your Device: Can revive a phone that has become completely unresponsive due to a software error.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the phone’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Leagoo S8

• Build Date: 20180703
  • File Name: Leagoo_S8_MT6750_20180703_7.0.zip
  • Size: 1.68 GB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract the Leagoo_S8_MT6750_20180703_7.0.zip file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6750_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Leagoo S8.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off phone to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.